5 Speed Drums

Shift Kits

SMOOTH SHIFT KITS

 

The design principles that made our Six-Speed Overdrive shift so smooth were applied to create a shift drum/pillow block kit that will bolt on to any 5-speed and give super smooth and precise shifting. The pillow blocks included with the kit are machined from our 6061-T6 extrusion stock for a significant increase in strength over stock. The roller shift drum features the same enhancements as the replacement 5-speed drum shown, as well as a revised detent profile for roller compatibility.

 

PN 170-5 Roller 5-Speed Shift Kit; 80-87 All
PN 171-5 Roller 5-Speed Shift Kit; 88-97 All
PN 172-5 Roller 5-Speed Shift Kit; 98-00 All except 88Bs
PN N182-6, 6 Spd N1 drum, 1998-00
PN N172-6, 6 Spd n1 Drum, 1998-00

________________________________________________________

 

 5-SPEED REPLACEMENT DRUMS

 

Our 5-speed drum is a direct replacement for all existing stock
H-D 5-speeds, but features improvements for smoother shifting.
The geometry of the fork pin grooves has been designed for
smoother shifting. Rotating inertia has been lowered by removing
the unneeded material from the barrel of the drum. Lower inertia
translates to lower shift efforts.

 

PN 181-5 Replacement 5-Speed Drum; 80-97 All
PN 182-5 Replacement 5-Speed Drum; 98-00 (except TC88B)

 

________________________________________________________

 

N1 Shift Drum

N1 SHIFT DRUMS

 

The N1 Shift Drums have a 0-down all-up shifting pattern, and eliminate any possibility of catching neutral on aggressive 1-2 shifts. Neutral is below 1st. The N1 drum is also popular with handshifting bikes where finding neutral without doubt or error is critical to safety or riding/looking smooth.

 

FOR 6-SPEED:

 

For BAKER OD6 and DD6 applications. The N1 Shift Drum only is required if you purchased your BAKER OD6 after June, 2000. For units purchased prior to that date you need to purchase the N171-6 Shift Kit. N171-6 comes with drum, 6061-T6 pillow blocks, and torsion-spring loaded detent system.

 

PN N181-6 N1 Pattern 6-speed Drum
PN N171-6 N1 Pattern for Left Side Drive BAKER 6-speed

 

N1 For DD6
PN 124-DD6N1-A, N1 pattern for BAKER DD6

 

FOR 5-SPEED:

 

BAKER N1 Shift Drums are available for stock or BAKER transmission applications. Call 1-877-640-2004 to see if you need to upgrade the ratchet pawl on your model.

 

PN 2-5R-N1 80-97
PN 2-5RL-N1 98-2006 (except Dyna)

________________________________________________________

 

REVERSE PATTERN DRUM KITS

 

Reverse pattern drum kits change the shift pattern to a 1-up, 4-down sequence shifting. This reverse pattern drum kit comes with a drum, 6061-T6 pillow blocks, and the torsion spring loaded roller detent shift system. By tapping down on the shift lever (instead of pulling up), you can accelerate up through the gears quicker, especially if you are running forward controls.

 

PN R181-6 Reverse Pattern 6-speed Drum
PN R171-6 Reverse Pattern 6-speed Shift Kit
PN R171-5 Reverse Pattern 5-speed Shift Kit

________________________________________________________

 

IGNITION KILL DRUM/SHIFT KITS

 

This slick 5-speed left side drive ignition kill shift kit from BAKER Drivetrain was developed for one thing in mind, Winning! Anybody who wants to launch hard and then up shift without the clutch WFO, this is the shift kit for you. Designed where every tenth of a second counts this is the easiest and trouble free method for a clutch less upshift.

 

PN N171-5KILL, 5 Spd N1 Ign Kill Shift Kit, 1990-06
 
Watch Bert BAKER make a 10.9 second pass with Ignition Kill
 

 
Watch James Simonelli cut a 10.15 quarter mile at 133 MPH with Ignition Kill
 

 
Click the link below for the ignition kill wiring diagram.
 
Ignition Kill Wiring Diagram

 

 

BAKER DRIVETRAIN| 9804 E. SAGINAW, HASLETT, MI, 48840 |1-877-640-2004| 517-339-3835 | FAX: 517-339-4590 @2012 BAKER INC
ALL RIGHTS RESERVED | TERMS | PRIVACY POLICY| HOURS: MON-FRI 8am-8pm EST