Share to FB

Attitude Adjuster

Prevent damage to your motorcycles left side motor case bearings, inner primary bearings, clutch hub bearings and transmission output gear bearings. If you have a 2006 or later Dyna, or a 2007 and later Softail/ Touring bike you know the issues that come along with the stock auto chain tensioner. At the first moment that the chain has any slack in it, the auto tensioner ratchets the shoe up another notch. Now one notch is not going to be an issue, but the tightening never stops and this causes several problems. Our manual chain tensioner allows you to set the chain to the proper 5/8”-7/8” (cold) freeplay, and never have to worry about it being too tight.

  • Chain shoe machined from Nylon 66
  • Active Plate and Back Support Plate investment cast with 4130 steel
  • 28% finer teeth spacing (compared to 2001-06 chain adjusters) for more accurate adjustments
  • Chain adjustment method same as 2001-06 style stock ‘L’Bracket’ adjusters.

Benefits

  • Increase torque by 3.42 ft/lbs
  • Reduces primary noise
  • Helps prevent damage to primary
  • Improves motor bottom end and inner primary race bearing durability
  • 2006-Later Dyna Models
  • 2007-Later Softail/ Touring Models 

The Attitude Chain Adjuster solves the issues associated with the stock auto chain tensioner on 2006-Later Dyna & 2007-Later Softail/ Touring models. The first moment the chain has enough slack into it to ratchet the shoe up another notch, and thus tightening the chain, it will. One notch tighter  might not be an issue, but you don’t have any control of when this mechanism stops tightening the chain. The end result in many cases is the primary chain is so tight that it will start wearing out left side motor case bearings, inner primary bearings, clutch hub bearings and transmission output gear bearings.  Our manual chain tensioner allows you to adjust the chain to the proper 5/8-7/8″ (cold) freeplay, and never have to worry about the chain getting too tight. We offer this chain adjuster for fitment with stock outer primary covers, as well as a package deal with the Bully Primary Cover.

    Instructions

    BAKER Attitude Adjuster Installation Instructions: Click Here

      Standard Gear Case Finish Examples (Not applicable to all products)

      Chrome

      Polished

      Raw

      Wrinkle Black

      These example finishes are intended to show the exterior treatments of cases, top covers and doors.

      TERM AND CONDITIONS                                                                                         

       

      BAKER Drivetrain reserves the right to change prices, terms or policies at any time without notice.

      Orders can be pre-paid using Visa, MasterCard, American Express, Discover or PayPal.

      All orders not pre-paid will be sent C.O.D. certified check or money order only unless pre-approved for company check acceptance.

      Any orders from outside the USA must be pre-paid in US funds via wire transfer; a $30 transfer fee will apply.

      Prices shown are F.O.B. Haslett, MI.

       

      LIMITED WARRANTY POLICY

       

      BAKER™ transmission assemblies, transmission kits, primaries, and oil pans are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 5 years from the date of purchase or up to 50,000 miles. BAKER™ clutches, kicker cover kits, belt drives, F6F kit, reverse systems, covers and accessories are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 2 years from the date of purchase or up to 24,000 miles - whichever occurs first. If the product is found by BAKER™ to be defective, such products will, at the option of BAKER™, be replaced or repaired at cost to BAKER™. 

       

      In the event warranty service is required, the original purchaser must call or write BAKER™ immediately with a description of the problem. If it is deemed necessary for BAKER™ to make an evaluation to determine whether the transmission assembly or transmission kit or accessory is defective, the entire transmission assembly, whether originally purchased as an assembly or kit, must be properly packaged and returned prepaid to BAKER™ with a copy of the original invoice of purchase. If after an evaluation has been made by BAKER™ and a defect in materials and/or workmanship is found, BAKER™  will, at BAKER™  option, repair or replace the defective part of the assembly. 

       

      RETURNS AND EXCHANGES

       

      Any merchandise returned for any reason (exchange, credit or modification) must be accompanied by a Return Goods Authorization (RGA) number or it will be refused. Call BAKER™ to obtain this number prior to returning goods for any reason. There is a 15% re-stocking fee for all returned items. BAKER™ is not liable for any shipping charges. 

       

      ADDITIONAL WARRANTY PROVISIONS

       

      NOTE: Limited warranty does not cover labor or other costs or expenses incidental to the repair and or replacement of BAKER™ products.

       

      This warranty does not apply if one or more of the following situations is judged by BAKER™ to be relevant: BAKER™ OEM transmissions; (these are subject to the OEM manufactures warranty only), Improper installation, accident, modification (including but not limited to use of unauthorized parts, transmission oils or lubricants), racing, high performance application, mishandling, misapplication, neglect (including but not limited to improper maintenance), or improper repair. 

       

      BAKER™ shall not be liable for any consequential or incidental damages arising out of or in connection with a BAKER™ transmission assembly, transmission kit, component or part. Consequential damages shall include without limitation, loss of use, income or profit, or losses sustained as the result of injury (including death) to any person or loss of or damage to property.

       

      BAKER™ transmissions, transmission kits and accessories are designed exclusively for use in American V-Twin motorcycles. BAKER™ shall have no warranty or liability obligation if BAKER™ parts are used in any other application.

       

      If it is determined that a BAKER™ product has been disassembled during the warranty period for any reason, this limited warranty will no longer apply unless you were instructed to do so by a BAKER Drivetrain technician for diagnostic purposes.

       

      The words H-D®, Softail®, FXR®, Dyna®, FLT®, FLH®, Sportster®, and Buell® are registered trademarks and are for reference only.

       

      Customer Reviews

      Based on 1 review Write a review
      Questions? Ask us anything:
      Contact us
      Or just call us at 517-339-3835. We're glad to help.

      Attitude Adjuster
      Move your mouse over image to zoom. Click to enlarge.
      Attitude Adjuster Attitude Adjuster Attitude Adjuster Attitude Adjuster chain tensioner for Harley-Davidson motorcycles Attitude Adjuster chain tensioner for Harley-Davidson motorcycles Attitude Adjuster chain tensioner for Harley-Davidson motorcycles