Share to FB

Armored Attitude Adjuster

Stronger than the original for those with more abusive inclinations!

The BAKER Armored Attitude Adjuster is an insurance policy for your motorcycle in the form of a manual chain tensioner that allows you to set the chain to the proper slack when cold. Be assured that the adjustment will not change, saving you money on costly repairs in the future.

With the stock auto chain tensioner used in 2006 and later Dynas as well as 2007 and later Softail and Touring bikes the primary chain tends to tighten over time. When cold, the center distance between the output of the engine and the input of the transmission is short, putting slack in the chain. The auto tensioner incrementally ratchets up, tightening the chain to compensate. This happens repeatedly. As your bike warms up, the center distance increases, and your chain becomes too tight. A chain that is too tight puts harsh loads on your motor case bearings, inner primary bearings, clutch hub bearings and transmission output gear bearings. If left unaddressed, you’ll end up paying thousands for repairs to your engine and transmission.

Our Armored Attitude Adjuster allows you to set the chain to the proper 5/8”-7/8” (cold) freeplay without the chance of overtightening so you can ride worry free!


 
  • Chain shoe machined from Nylon 66
  • Active Plate and Back Support Plate investment cast with 4130 steel
  • 28% finer teeth spacing (compared to 2001-06 chain adjusters) for more accurate adjustments
  • Chain adjustment method same as 2001-06 style stock ‘L’Bracket’ adjusters.

Benefits

  • Increases torque by 3.42 ft/lbs
  • Reduces primary noise
  • Helps prevent damage to the primary
  • Improves motor bottom end and inner primary race bearing durability
  • 2006-Later Dyna Models
  • 2007-2017 Softail Models
  • 2007-Later Touring Models

    The Armored Attitude Adjuster is an excellent solution for any non-racing application. 

    The Attitude Chain Adjuster solves the issues associated with the stock auto chain tensioner on 2006-Later Dyna & 2007-Later Softail/ Touring models. The first moment the chain has enough slack into it to ratchet the shoe up another notch, and thus tightening the chain, it will. One notch tighter  might not be an issue, but you don’t have any control of when this mechanism stops tightening the chain. The end result in many cases is the primary chain is so tight that it will start wearing out left side motor case bearings, inner primary bearings, clutch hub bearings and transmission output gear bearings.  Our manual chain tensioner allows you to adjust the chain to the proper 5/8-7/8″ (cold) freeplay, and never have to worry about the chain getting too tight. We offer this chain adjuster for fitment with stock outer primary covers.

    Note: Check the primary chain tension at the 500-mile interval and then after every 5000 miles.  If the chain cannot be adjusted properly, then replace the chain.  

      Instructions

      BAKER Attitude Adjuster Installation Instructions: Click Here

      Video on proper chain adjustment: Click Here

        TERMS AND CONDITIONS

        BAKER Drivetrain reserves the right to change prices, terms or policies at any time without notice. Orders can be pre-paid using Visa, MasterCard, American Express, Discover or PayPal. All orders not pre-paid will be sent C.O.D. certified check or money order only unless pre-approved for company check acceptance. Any orders from outside the USA must be pre-paid in US funds via wire transfer; a $30 transfer fee will apply. Prices shown are F.O.B. Haslett, MI.

        LIMITED WARRANTY POLICY

        BAKER™ transmission assemblies and transmission builder 's kits, are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 5 years from the date of purchase or up to 50,000 miles, whichever occurs first. All other BAKER products are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 2 years from the date of purchase or up to 24,000 miles, whichever occurs first, except for the following; Warranty does not cover clutch plate wear, throw out bearing failures or mainshaft breakage due to improper clutch nut installation.Electrical components carry a 30-day warranty; cosmetic finishes (chrome plating, hard anodizing, powder coating) are covered for 60 days. Certain promotional products may carry a shorter warranty as specified at the time of purchase. If the product is found by BAKER to be defective, such products will, at the option of BAKER, be replaced or repaired at cost to BAKER.In the event warranty service is required, the original purchaser must call or write BAKER immediately with a description of the problem. If it is deemed necessary for BAKER to make an evaluation to determine whether the transmission assembly or transmission kit or accessory is defective, the entire transmission assembly, whether originally purchased as an assembly or kit, must be properly packaged and returned prepaid to BAKER with a copy of the original purchase invoice. If after evaluation by BAKER a defect in materials and/or workmanship is found, BAKER will, at their option, repair or replace the defective part of the assembly.

        RETURNS AND EXCHANGES

        Returns are permitted within 30 days of the delivery date. Any merchandise returned for any reason (exchange, credit or modification) must be accompanied by a Return Goods Authorization (RGA) number or it will be refused. Call BAKER to obtain this number prior to returning goods for any reason. There is a 15% re-stocking fee for all returned items. BAKER is not liable for any shipping.

        ADDITIONAL WARRANTY PROVISIONS

        NOTE: Limited warranty does not cover labor or other costs or expenses incidental to the repair and or replacement of BAKER products.This warranty does not apply if one or more of the following situations is judged by BAKER to be relevant: BAKER OEM transmissions ; (these are subject to the OEM manufacturers warranty only), Improper installation , accident, modification (including but not limited to use of unauthorized parts, transmission oils or lubricants), racing, high performance application, mishandling, misapplication, neglect (including but not limited to improper maintenance), or improper repair. BAKER shall not be liable for any consequential or incidental damages arising out of or in connection with a BAKER transmission assembly, transmission kit, component or part. Consequential damages shall include without limitation, loss of use, income or profit, or losses sustained as the result of injury (including death) to any person or loss of or damage to property.BAKER transmissions, transmission kits and accessories are designed exclusively for use in American V-Twin motorcycles. BAKER shall have no warranty or liability obligation if BAKER parts are used in any other application.If it is determined that a BAKER product has been disassembled during the warranty period for any reason, this limited warranty will no longer apply unless you were instructed to do so by a BAKER Drivetrain technician for diagnostic purposes.



        Armored Attitude Adjuster
        Move your mouse over image to zoom. Click to enlarge.
        Armored Attitude Adjuster Armored Attitude Adjuster
        Customer Reviews
        4.7 Based on 97 Reviews
        5 ★
        84% 
        81
        4 ★
        7% 
        7
        3 ★
        5% 
        5
        2 ★
        1% 
        1
        1 ★
        3% 
        3
        Customer Photos
        Write a Review Ask a Question

        Thank you for submitting a review!

        Your input is very much appreciated. Share it with your friends so they can enjoy it too!

        Filter Reviews:
        • Baker
        • chain
        • parts
        • adjuster
        • quality
        • difference
        • primary
        • Harley
        • design
        • noise
        WO
        01/06/2024
        William O.
        United States United States

        Happy Primary

        A must have for a bullet-proof primary.

        GM
        11/24/2023
        Genevieve M.
        United States United States
        • What model motorcycle do you ride? 16’ flstc & 08 flstsb

        Must have

        Definitely need this if you want a practically maintenance free primary

        TH
        08/28/2023
        Travis H.
        United States United States

        It Worked Like a Charm Again

        Like any other Baker product I have purchased, (I have purchased several including this one in the past X2) it fit and works like a charm. I keep buying this part because it works and is reliable.

        WB
        07/06/2023
        Weston B.
        United States United States
        • What model motorcycle do you ride? 2011 FXDB Street bob

        Armored Attitude Adjuster

        The transaction was smooth no BS, and the part itself is well worth it. This adjuster is a beast compared to any other stock style adjuster.

        DW
        06/13/2023
        Dennis W.
        United States United States
        • What model motorcycle do you ride? 2014 Street Glide

        Armored Attitude Adjuster

        Again would like to thank you all of the Baker Team for a great product that works very well with other upgrades for my 2014 Street Glide!

        BAKER Drivetrain Armored Attitude Adjuster Review
        Web Product ID: 10401157262
        Baker Drivetrain Team Illustration
        Stronger than the original for those with more abusive inclinations!

        The BAKER Armored Attitude Adjuster is an insurance policy for your motorcycle in the form of a manual chain tensioner that allows you to set the chain to the proper slack when cold. Be assured that the adjustment will not change, saving you money on costly repairs in the future.

        With the stock auto chain tensioner used in 2006 and later Dynas as well as 2007 and later Softail and Touring bikes the primary chain tends to tighten over time. When cold, the center distance between the output of the engine and the input of the transmission is short, putting slack in the chain. The auto tensioner incrementally ratchets up, tightening the chain to compensate. This happens repeatedly. As your bike warms up, the center distance increases, and your chain becomes too tight. A chain that is too tight puts harsh loads on your motor case bearings, inner primary bearings, clutch hub bearings and transmission output gear bearings. If left unaddressed, you’ll end up paying thousands for repairs to your engine and transmission.

        Our Armored Attitude Adjuster allows you to set the chain to the proper 5/8”-7/8” (cold) freeplay without the chance of overtightening so you can ride worry free!


         
        • Chain shoe machined from Nylon 66
        • Active Plate and Back Support Plate investment cast with 4130 steel
        • 28% finer teeth spacing (compared to 2001-06 chain adjusters) for more accurate adjustments
        • Chain adjustment method same as 2001-06 style stock ‘L’Bracket’ adjusters.

        Benefits

        • Increases torque by 3.42 ft/lbs
        • Reduces primary noise
        • Helps prevent damage to the primary
        • Improves motor bottom end and inner primary race bearing durability
        • 2006-Later Dyna Models
        • 2007-2017 Softail Models
        • 2007-Later Touring Models

          The Armored Attitude Adjuster is an excellent solution for any non-racing application. 

          The Attitude Chain Adjuster solves the issues associated with the stock auto chain tensioner on 2006-Later Dyna & 2007-Later Softail/ Touring models. The first moment the chain has enough slack into it to ratchet the shoe up another notch, and thus tightening the chain, it will. One notch tighter  might not be an issue, but you don’t have any control of when this mechanism stops tightening the chain. The end result in many cases is the primary chain is so tight that it will start wearing out left side motor case bearings, inner primary bearings, clutch hub bearings and transmission output gear bearings.  Our manual chain tensioner allows you to adjust the chain to the proper 5/8-7/8″ (cold) freeplay, and never have to worry about the chain getting too tight. We offer this chain adjuster for fitment with stock outer primary covers.

          Note: Check the primary chain tension at the 500-mile interval and then after every 5000 miles.  If the chain cannot be adjusted properly, then replace the chain.  

            Instructions

            BAKER Attitude Adjuster Installation Instructions: Click Here

            Video on proper chain adjustment: Click Here

              TERMS AND CONDITIONS

              BAKER Drivetrain reserves the right to change prices, terms or policies at any time without notice. Orders can be pre-paid using Visa, MasterCard, American Express, Discover or PayPal. All orders not pre-paid will be sent C.O.D. certified check or money order only unless pre-approved for company check acceptance. Any orders from outside the USA must be pre-paid in US funds via wire transfer; a $30 transfer fee will apply. Prices shown are F.O.B. Haslett, MI.

              LIMITED WARRANTY POLICY

              BAKER™ transmission assemblies and transmission builder 's kits, are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 5 years from the date of purchase or up to 50,000 miles, whichever occurs first. All other BAKER products are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 2 years from the date of purchase or up to 24,000 miles, whichever occurs first, except for the following; Warranty does not cover clutch plate wear, throw out bearing failures or mainshaft breakage due to improper clutch nut installation.Electrical components carry a 30-day warranty; cosmetic finishes (chrome plating, hard anodizing, powder coating) are covered for 60 days. Certain promotional products may carry a shorter warranty as specified at the time of purchase. If the product is found by BAKER to be defective, such products will, at the option of BAKER, be replaced or repaired at cost to BAKER.In the event warranty service is required, the original purchaser must call or write BAKER immediately with a description of the problem. If it is deemed necessary for BAKER to make an evaluation to determine whether the transmission assembly or transmission kit or accessory is defective, the entire transmission assembly, whether originally purchased as an assembly or kit, must be properly packaged and returned prepaid to BAKER with a copy of the original purchase invoice. If after evaluation by BAKER a defect in materials and/or workmanship is found, BAKER will, at their option, repair or replace the defective part of the assembly.

              RETURNS AND EXCHANGES

              Returns are permitted within 30 days of the delivery date. Any merchandise returned for any reason (exchange, credit or modification) must be accompanied by a Return Goods Authorization (RGA) number or it will be refused. Call BAKER to obtain this number prior to returning goods for any reason. There is a 15% re-stocking fee for all returned items. BAKER is not liable for any shipping.

              ADDITIONAL WARRANTY PROVISIONS

              NOTE: Limited warranty does not cover labor or other costs or expenses incidental to the repair and or replacement of BAKER products.This warranty does not apply if one or more of the following situations is judged by BAKER to be relevant: BAKER OEM transmissions ; (these are subject to the OEM manufacturers warranty only), Improper installation , accident, modification (including but not limited to use of unauthorized parts, transmission oils or lubricants), racing, high performance application, mishandling, misapplication, neglect (including but not limited to improper maintenance), or improper repair. BAKER shall not be liable for any consequential or incidental damages arising out of or in connection with a BAKER transmission assembly, transmission kit, component or part. Consequential damages shall include without limitation, loss of use, income or profit, or losses sustained as the result of injury (including death) to any person or loss of or damage to property.BAKER transmissions, transmission kits and accessories are designed exclusively for use in American V-Twin motorcycles. BAKER shall have no warranty or liability obligation if BAKER parts are used in any other application.If it is determined that a BAKER product has been disassembled during the warranty period for any reason, this limited warranty will no longer apply unless you were instructed to do so by a BAKER Drivetrain technician for diagnostic purposes.