Share to FB

Buell Chain Conversion Kits

Convert the stock secondary belt drive to a 520 or 530 chain. 

  • Run up to a 200 series tire on your stock rim with no modification
  • Improved tensile rigidity for direct power transfer to rear wheel
  • Quick inexpensive sprocket changes allow you to dial in your secondary drive ratio for optimal performance

Buell Chain Conversion Kits are designed to fit 1994 – 2002 tube frame Buell models that utilize (5) 7/16″ Dia. fasteners on the rear sprocket; including S1, S2, S3, X1, and M2 models. They will not fit XB series or Sportster models. 

Included Components

  • Rear sprocket made out of 7075-T6
  • Rear sprocket spacer
  • Front sprocket
  • Front sprocket spacer & seal
  • Chain (520 or 530) with chain guide & bracket 

530 Chains have a 5/8″ pitch and a roller width of 3/8″ 

530 Chain Kits For 1994-2002 Tube Frame Buell Models

New PN Old PN Description
230-56S-A 230-56S 48 Rear / 23 Front, 2.09 Ratio; Equiv. Belt Setup & Ratio 61/29 = 2.10 Ratio
231-56S-A 231-56S 50 Rear / 23 Front, 2.17 Ratio; Equiv. Belt Setup & Ratio 61/28 = 2.18 Ratio
232-56S-A 232-56S 52 Rear / 23 Front, 2.26 Ratio; Equiv. Belt Setup & Ratio 61/27 = 2.26 Ratio
233-56S-A 233-56S 54 Rear / 23 Front, 2.35 Ratio; Equiv. Belt Setup & Ratio 61/26 = 2.35 Ratio

520 Chains have a 5/8″ pitch and a roller width of 1/4″

520 Chain Kits For 1994-2002 Tube Frame Buell Models

New PN Old PN Description
234-56S-A 234-56S 48 Rear / 23 Front, 2.09 Ratio; Equiv. Belt Setup & Ratio 61/29 = 2.10 Ratio
235-56S-A 235-56S 50 Rear / 23 Front, 2.17 Ratio; Equiv. Belt Setup & Ratio 61/28 = 2.18 Ratio
236-56S-A 236-56S 52 Rear / 23 Front, 2.26 Ratio; Equiv. Belt Setup & Ratio 61/27 = 2.26 Ratio
237-56S-A 237-56S 54 Rear / 23 Front, 2.35 Ratio; Equiv. Belt Setup & Ratio 61/26 = 2.35 Ratio

 

Installation Instructions

530 Chain Conversion Kit Instructions: Click Here

TERM AND CONDITIONS                                                                                         

  • BAKER Drivetrain reserves the right to change prices, terms or policies at any time without notice.
  • Orders can be pre-paid using Visa, MasterCard, American Express, Discover or PayPal.
  • All orders not pre-paid will be sent C.O.D. certified check or money order only unless pre-approved for company check acceptance.
  • Any orders from outside the USA must be pre-paid in US funds via wire transfer; a $30 transfer fee will apply.
  • Prices shown are F.O.B. Haslett, MI.

LIMITED WARRANTY POLICY

BAKER™ transmission assemblies, transmission kits, primaries, and oil pans are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 5 years from the date of purchase or up to 50,000 miles. BAKER™ clutches, kicker cover kits, belt drives, F6F kit, reverse systems, covers and accessories are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 2 years from the date of purchase or up to 24,000 miles - whichever occurs first. If the product is found by BAKER™ to be defective, such products will, at the option of BAKER™, be replaced or repaired at cost to BAKER™. 

In the event warranty service is required, the original purchaser must call or write BAKER™ immediately with a description of the problem. If it is deemed necessary for BAKER™ to make an evaluation to determine whether the transmission assembly or transmission kit or accessory is defective, the entire transmission assembly, whether originally purchased as an assembly or kit, must be properly packaged and returned prepaid to BAKER™ with a copy of the original invoice of purchase. If after an evaluation has been made by BAKER™ and a defect in materials and/or workmanship is found, BAKER™  will, at BAKER™  option, repair or replace the defective part of the assembly. 

WARRANTIES FOR "INSIDER SPECIAL" PRODUCTS

Due to the uniqueness, low price and assembly outside of typical production process of products indicated as Insider Special products, purchasing these Insider Special products include a warranty so to guarantee the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 1 year from the date of purchase or up to 12,000 miles. We have provided extended options for you to purchase below. 

RETURNS AND EXCHANGES

Any merchandise returned for any reason (exchange, credit or modification) must be accompanied by a Return Goods Authorization (RGA) number or it will be refused. Call BAKER™ to obtain this number prior to returning goods for any reason. There is a 15% re-stocking fee for all returned items. BAKER™ is not liable for any shipping charges. 

ADDITIONAL WARRANTY PROVISIONS

NOTE: Limited warranty does not cover labor or other costs or expenses incidental to the repair and or replacement of BAKER™ products.

This warranty does not apply if one or more of the following situations is judged by BAKER™ to be relevant: BAKER™ OEM transmissions; (these are subject to the OEM manufactures warranty only), Improper installation, accident, modification (including but not limited to use of unauthorized parts, transmission oils or lubricants), racing, high performance application, mishandling, misapplication, neglect (including but not limited to improper maintenance), or improper repair. 

BAKER™ shall not be liable for any consequential or incidental damages arising out of or in connection with a BAKER™ transmission assembly, transmission kit, component or part. Consequential damages shall include without limitation, loss of use, income or profit, or losses sustained as the result of injury (including death) to any person or loss of or damage to property.

BAKER™ transmissions, transmission kits and accessories are designed exclusively for use in American V-Twin motorcycles. BAKER™ shall have no warranty or liability obligation if BAKER™ parts are used in any other application.

If it is determined that a BAKER™ product has been disassembled during the warranty period for any reason, this limited warranty will no longer apply unless you were instructed to do so by a BAKER Drivetrain technician for diagnostic purposes.

The words H-D®, Softail®, FXR®, Dyna®, FLT®, FLH®, Sportster®, and Buell® are registered trademarks and are for reference only.



Buell Chain Conversion Kits
Move your mouse over image to zoom. Click to enlarge.
Web Product ID: 2439588380750
Baker Drivetrain Team Illustration