Share to FB

68008 - Snap Ring, 5/16", External, Pawl Pivot Shaft

Snap Ring, 5/16", External, Pawl Pivot Shaft

Move your mouse over image to zoom. Click to enlarge.

Customer Reviews

5 Based on 1 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
Jim M.
United States United States


I recently removed a JIMS FAT 5 in favor of installing a new BAKER OD Transmission in my Brother's 2002 H-D Bagger. This trans was ordered with an N-1 shift drum. After installing the trans gear-set and bench testing the shifting mechanism for proper function.... the trans would NOT downshift out of 6th gear. All other gears would shift up and down just fine.... but NO downshift from 6th! After removing and closely inspecting the shift drum pins.... it was clearly evident that the SPACING between the pins while in 6th gear was dimensionally WIDER... when the drum was in the 6th gear position. The ONLY SOLUTION I could come up with is that the ID SPACING in the TOP ARM of the shifter pawl HAD TO BE WIDER for proper shift function using the N-1 shift drum. In back and forth texting and pictures sent to "Buddy Don" (Florida based Baker Drivetrain salesman/ "tech guy"..... NO SOLUTION was found.... or KNOWN ABOUT by Buddy Don. In MY FRUSTRATION I called Baker's home office in Haslet, Michigan and spoke with an EXTREMELY KNOWLEDGEABLE and VERY RESPECTFUL young man named CHAD. I explained MY PROBLEM to him.... and IMMEDIATELY Chad had a SOLUTION. This turned out to be a top shifter pawl arm that had an ID spacing that was .086 WIDER than the one I had installed. I told Chad that I was in need of this part IMMEDIATELY.... as it was Friday afternoon and I was planning on leaving for Florida that following Monday. Chad sent the shift pawl arm to me OVERNITE via UPS with a Saturday delivery (no charge to me). I received the part.... immediately installed it.... BINGO... the trans shifted and downshifted PERFECTLY!!!!!!!! THANK YOU TO CHAD for having the KNOWLEDGE and the DESIRE to SOLVE MY PROBLEM VERY FAST, EFFICIENTLY and with GREAT RESPECT. I am VERY MUCH APPRECIATIVE of CHAD for taking care of what was a very FRUSTRATING PROBLEM for me! If you are reading this, (Bert Baker)... give Chad a RAISE and CONGRADULATE HIM for doing such a GREAT JOB for you! Sincerely, J.Mac Logansport, IN

Web Product ID: 2431149768782
Baker Drivetrain Team Illustration