$ 199.00
Clutch Pack Kits for BAKER clutches
BAKER Clutch Pack Replacement Kits contain all necessary fiber and steel plates to restore like new performance to your BAKER clutch. These are original equipment plates which will yield proper stack height and trouble free operation.
The most critical part of installing new clutch plates is getting the clutch stack height right. If the stack height is short, your new clutch will slip. To get the right stack height we sort through hundreds of plates and dimensionally select the right combination of plates to yield the right stack height. Final height check is verified (+/-.005”) on granite plate with a height guage and a 50 lb cylindrical weight sitting on top of the stack to simulate the pressure plate load.
9-Plate Clutch Stack for Big Dog 2005-2010
OEM replacement 9-plate clutch stack, pre-measured to a height of 1.960″, fits Big Dog models from 2005-2010. A replacement clutch stack can be used as a direct replacement for both existing 9-plate and 12-plate clutch configurations. If switching from a 12-plate stack to a 9-plate stack, you must also update the inner and outer ball and ramp assembly located in the pulley cover, for more information, please contact the BAKER Drivetrain tech department.
12-Plate Clutch Stack for Big Dog 2005-2010
OEM replacement 12-plate clutch stack, pre-measured to a height of 1.970″, fits Big Dog models from 2005-2010
BAKER King Kong Clutch
The King Kong ring gear basket design and friction plates dwarfs the stock clutch components. Look at the frictions plates shown to the right, by increasing the diameter of the friction plate we are able to increase the torque handling capacity. The KKC come with 20 of these massive single-sided friction plates. Being single-sided friction plates the KKC dissipates heat more quickly than a standard 2-sided friction plate, the end result being a longer-lasting, durable clutch.
BAKER 9-Plate Street Clutch
9 kevlar 2-sided clutch plates with large radius
BAKER Synchronous Belt Drive Clutch
11 plate clutch pack holds up to 120 ft-lbs of continuous use while the tight tolerance clutch basket all but eliminates the 'neutral clutch rattle' most belt drives suffer from.
Please refer to our Sprocket/Chain Matrix in order to find the correct pitch chain for your setup.
CPRK-BDM | Big Dog 9-Plate Clutch Pack, 2005-2010 |
CPRK-KKC | BAKER King Kong Clutch Pack |
CPRK-9P | BAKER 9-Plate Street Performance Clutch Pack |
CPRK-SBD | BAKER Synchronous Belt Drive Clutch Pack / BAKER Big Dog Belt Drive Clutch Pack |
TERMS AND CONDITIONS
BAKER Drivetrain reserves the right to change prices, terms or policies at any time without notice. Orders can be pre-paid using Visa, MasterCard, American Express, Discover or PayPal. All orders not pre-paid will be sent C.O.D. certified check or money order only unless pre-approved for company check acceptance. Any orders from outside the USA must be pre-paid in US funds via wire transfer; a $30 transfer fee will apply. Prices shown are F.O.B. Haslett, MI.
LIMITED WARRANTY POLICY
BAKER™ transmission assemblies and transmission builder 's kits, are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 5 years from the date of purchase or up to 50,000 miles, whichever occurs first. All other BAKER products are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 2 years from the date of purchase or up to 24,000 miles, whichever occurs first, except for the following; Warranty does not cover clutch plate wear, throw out bearing failures or mainshaft breakage due to improper clutch nut installation.Electrical components carry a 30-day warranty; cosmetic finishes (chrome plating, hard anodizing, powder coating) are covered for 60 days. Certain promotional products may carry a shorter warranty as specified at the time of purchase. If the product is found by BAKER to be defective, such products will, at the option of BAKER, be replaced or repaired at cost to BAKER.In the event warranty service is required, the original purchaser must call or write BAKER immediately with a description of the problem. If it is deemed necessary for BAKER to make an evaluation to determine whether the transmission assembly or transmission kit or accessory is defective, the entire transmission assembly, whether originally purchased as an assembly or kit, must be properly packaged and returned prepaid to BAKER with a copy of the original purchase invoice. If after evaluation by BAKER a defect in materials and/or workmanship is found, BAKER will, at their option, repair or replace the defective part of the assembly.
RETURNS AND EXCHANGES
Returns are permitted within 30 days of the delivery date. Any merchandise returned for any reason (exchange, credit or modification) must be accompanied by a Return Goods Authorization (RGA) number or it will be refused. Call BAKER to obtain this number prior to returning goods for any reason. There is a 15% re-stocking fee for all returned items. BAKER is not liable for any shipping.
ADDITIONAL WARRANTY PROVISIONS
NOTE: Limited warranty does not cover labor or other costs or expenses incidental to the repair and or replacement of BAKER products.This warranty does not apply if one or more of the following situations is judged by BAKER to be relevant: BAKER OEM transmissions ; (these are subject to the OEM manufacturers warranty only), Improper installation , accident, modification (including but not limited to use of unauthorized parts, transmission oils or lubricants), racing, high performance application, mishandling, misapplication, neglect (including but not limited to improper maintenance), or improper repair. BAKER shall not be liable for any consequential or incidental damages arising out of or in connection with a BAKER transmission assembly, transmission kit, component or part. Consequential damages shall include without limitation, loss of use, income or profit, or losses sustained as the result of injury (including death) to any person or loss of or damage to property.BAKER transmissions, transmission kits and accessories are designed exclusively for use in American V-Twin motorcycles. BAKER shall have no warranty or liability obligation if BAKER parts are used in any other application.If it is determined that a BAKER product has been disassembled during the warranty period for any reason, this limited warranty will no longer apply unless you were instructed to do so by a BAKER Drivetrain technician for diagnostic purposes.
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
Always nothing but great product from Baker. One can only hope they don't go the way of so many other custom vendors.
Took it to the drags. Ran 11.6 @115.98 mph and it held up well
PARTS SHIPPED FAST AND IN STOCK!
Sign up to our mailing list and get the latest on specials, contests, giveaways, new releases and more …
© 2025 BAKER Drivetrain,
Haslett, Michigan 48840 USA | Call Us: 517-339-3835
Buy now, Pay later with Affirm here.
Clutch Pack Kits for BAKER clutches
BAKER Clutch Pack Replacement Kits contain all necessary fiber and steel plates to restore like new performance to your BAKER clutch. These are original equipment plates which will yield proper stack height and trouble free operation.
The most critical part of installing new clutch plates is getting the clutch stack height right. If the stack height is short, your new clutch will slip. To get the right stack height we sort through hundreds of plates and dimensionally select the right combination of plates to yield the right stack height. Final height check is verified (+/-.005”) on granite plate with a height guage and a 50 lb cylindrical weight sitting on top of the stack to simulate the pressure plate load.
9-Plate Clutch Stack for Big Dog 2005-2010
OEM replacement 9-plate clutch stack, pre-measured to a height of 1.960″, fits Big Dog models from 2005-2010. A replacement clutch stack can be used as a direct replacement for both existing 9-plate and 12-plate clutch configurations. If switching from a 12-plate stack to a 9-plate stack, you must also update the inner and outer ball and ramp assembly located in the pulley cover, for more information, please contact the BAKER Drivetrain tech department.
12-Plate Clutch Stack for Big Dog 2005-2010
OEM replacement 12-plate clutch stack, pre-measured to a height of 1.970″, fits Big Dog models from 2005-2010
BAKER King Kong Clutch
The King Kong ring gear basket design and friction plates dwarfs the stock clutch components. Look at the frictions plates shown to the right, by increasing the diameter of the friction plate we are able to increase the torque handling capacity. The KKC come with 20 of these massive single-sided friction plates. Being single-sided friction plates the KKC dissipates heat more quickly than a standard 2-sided friction plate, the end result being a longer-lasting, durable clutch.
BAKER 9-Plate Street Clutch
9 kevlar 2-sided clutch plates with large radius
BAKER Synchronous Belt Drive Clutch
11 plate clutch pack holds up to 120 ft-lbs of continuous use while the tight tolerance clutch basket all but eliminates the 'neutral clutch rattle' most belt drives suffer from.
Please refer to our Sprocket/Chain Matrix in order to find the correct pitch chain for your setup.
CPRK-BDM | Big Dog 9-Plate Clutch Pack, 2005-2010 |
CPRK-KKC | BAKER King Kong Clutch Pack |
CPRK-9P | BAKER 9-Plate Street Performance Clutch Pack |
CPRK-SBD | BAKER Synchronous Belt Drive Clutch Pack / BAKER Big Dog Belt Drive Clutch Pack |
TERMS AND CONDITIONS
BAKER Drivetrain reserves the right to change prices, terms or policies at any time without notice. Orders can be pre-paid using Visa, MasterCard, American Express, Discover or PayPal. All orders not pre-paid will be sent C.O.D. certified check or money order only unless pre-approved for company check acceptance. Any orders from outside the USA must be pre-paid in US funds via wire transfer; a $30 transfer fee will apply. Prices shown are F.O.B. Haslett, MI.
LIMITED WARRANTY POLICY
BAKER™ transmission assemblies and transmission builder 's kits, are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 5 years from the date of purchase or up to 50,000 miles, whichever occurs first. All other BAKER products are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 2 years from the date of purchase or up to 24,000 miles, whichever occurs first, except for the following; Warranty does not cover clutch plate wear, throw out bearing failures or mainshaft breakage due to improper clutch nut installation.Electrical components carry a 30-day warranty; cosmetic finishes (chrome plating, hard anodizing, powder coating) are covered for 60 days. Certain promotional products may carry a shorter warranty as specified at the time of purchase. If the product is found by BAKER to be defective, such products will, at the option of BAKER, be replaced or repaired at cost to BAKER.In the event warranty service is required, the original purchaser must call or write BAKER immediately with a description of the problem. If it is deemed necessary for BAKER to make an evaluation to determine whether the transmission assembly or transmission kit or accessory is defective, the entire transmission assembly, whether originally purchased as an assembly or kit, must be properly packaged and returned prepaid to BAKER with a copy of the original purchase invoice. If after evaluation by BAKER a defect in materials and/or workmanship is found, BAKER will, at their option, repair or replace the defective part of the assembly.
RETURNS AND EXCHANGES
Returns are permitted within 30 days of the delivery date. Any merchandise returned for any reason (exchange, credit or modification) must be accompanied by a Return Goods Authorization (RGA) number or it will be refused. Call BAKER to obtain this number prior to returning goods for any reason. There is a 15% re-stocking fee for all returned items. BAKER is not liable for any shipping.
ADDITIONAL WARRANTY PROVISIONS
NOTE: Limited warranty does not cover labor or other costs or expenses incidental to the repair and or replacement of BAKER products.This warranty does not apply if one or more of the following situations is judged by BAKER to be relevant: BAKER OEM transmissions ; (these are subject to the OEM manufacturers warranty only), Improper installation , accident, modification (including but not limited to use of unauthorized parts, transmission oils or lubricants), racing, high performance application, mishandling, misapplication, neglect (including but not limited to improper maintenance), or improper repair. BAKER shall not be liable for any consequential or incidental damages arising out of or in connection with a BAKER transmission assembly, transmission kit, component or part. Consequential damages shall include without limitation, loss of use, income or profit, or losses sustained as the result of injury (including death) to any person or loss of or damage to property.BAKER transmissions, transmission kits and accessories are designed exclusively for use in American V-Twin motorcycles. BAKER shall have no warranty or liability obligation if BAKER parts are used in any other application.If it is determined that a BAKER product has been disassembled during the warranty period for any reason, this limited warranty will no longer apply unless you were instructed to do so by a BAKER Drivetrain technician for diagnostic purposes.