Our BAKER DD5 is not just a replacement for the stock 5-speed. Whether you’re going down the drag strip or you’re cruising down the road, the torque capacity, long-term durability, and shift quality are greatly improved over stock. Will handle up to 200 H.P. no problem.
Bearing Door Type: All DD5 bearing doors have the same outer profile as a stock 5-speed, so exhaust brackets, torque arms, etc. fit like stock. The DD5 door comes with or without an ear. The ear door is for exhaust bracket mounting and the non-ear door fits 1993-2006 FL applications.
Mainshaft: The 1991 style splined mainshaft comes standard on the DD5 Builder’s Kit. A 1987-1989.5 tapered mainshaft is available upon request.
1st Gear Ratio: The 2.94 1st gear ratio is a good all-around ratio. The optional 3.24 1st gear is recommended for heavy GVW applications.
These example finishes are intended to show the exterior treatments of cases, top covers and doors.
TERMS AND CONDITIONS
BAKER Drivetrain reserves the right to change prices, terms or policies at any time without notice. Orders can be pre-paid using Visa, MasterCard, American Express, Discover or PayPal. All orders not pre-paid will be sent C.O.D. certified check or money order only unless pre-approved for company check acceptance. Any orders from outside the USA must be pre-paid in US funds via wire transfer; a $30 transfer fee will apply. Prices shown are F.O.B. Haslett, MI.
LIMITED WARRANTY POLICY
BAKER™ transmission assemblies and transmission builder 's kits, are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 5 years from the date of purchase or up to 50,000 miles, whichever occurs first. All other BAKER products are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 2 years from the date of purchase or up to 24,000 miles, whichever occurs first, except for the following; Warranty does not cover clutch plate wear, throw out bearing failures or mainshaft breakage due to improper clutch nut installation.Electrical components carry a 30-day warranty; cosmetic finishes (chrome plating, hard anodizing, powder coating) are covered for 60 days. Certain promotional products may carry a shorter warranty as specified at the time of purchase. If the product is found by BAKER to be defective, such products will, at the option of BAKER, be replaced or repaired at cost to BAKER.In the event warranty service is required, the original purchaser must call or write BAKER immediately with a description of the problem. If it is deemed necessary for BAKER to make an evaluation to determine whether the transmission assembly or transmission kit or accessory is defective, the entire transmission assembly, whether originally purchased as an assembly or kit, must be properly packaged and returned prepaid to BAKER with a copy of the original purchase invoice. If after evaluation by BAKER a defect in materials and/or workmanship is found, BAKER will, at their option, repair or replace the defective part of the assembly.
RETURNS AND EXCHANGES
Returns are permitted within 90 days of the delivery date. Any merchandise returned for any reason (exchange, credit or modification) must be accompanied by a Return Goods Authorization (RGA) number or it will be refused. Call BAKER to obtain this number prior to returning goods for any reason. There is a 15% re-stocking fee for all returned items. BAKER is not liable for any shipping.
ADDITIONAL WARRANTY PROVISIONS
NOTE: Limited warranty does not cover labor or other costs or expenses incidental to the repair and or replacement of BAKER products.This warranty does not apply if one or more of the following situations is judged by BAKER to be relevant: BAKER OEM transmissions ; (these are subject to the OEM manufacturers warranty only), Improper installation , accident, modification (including but not limited to use of unauthorized parts, transmission oils or lubricants), racing, high performance application, mishandling, misapplication, neglect (including but not limited to improper maintenance), or improper repair.BAKER shall not be liable for any consequential or incidental damages arising out of or in connection with a BAKER transmission assembly, transmission kit, component or part. Consequential damages shall include without limitation, loss of use, income or profit, or losses sustained as the result of injury (including death) to any person or loss of or damage to property.BAKER transmissions, transmission kits and accessories are designed exclusively for use in American V-Twin motorcycles. BAKER shall have no warranty or liability obligation if BAKER parts are used in any other application.If it is determined that a BAKER product has been disassembled during the warranty period for any reason, this limited warranty will no longer apply unless you were instructed to do so by a BAKER Drivetrain technician for diagnostic purposes.
I'm still working on getting it back together. All of the parts from the Baker DD5 rebuild kit are lot stronger looking, than the original Harley transmission parts. The bearings and the seals are better quality than stock. Cannot wait to get it on the road.
I have had installed more than 1 direct drive 5 speed. Tha last on my own 2004 ultra with S&S 124 and electric shifter All of these transmissions are great. All I can compare them too are modern day metric motorcycle transmissions so smooth no clunky N to 1st all other gears shift with a simple click up. I can’t believe HD hasn’t tried to rip Baker transmissions design off yet but it is truly amazing. Thanks Baker
Great price and all of the ones we installed (check our sale history think we sold 3-4?) our customers love it. Wish it was still offered ! Chris @ Hawgworx
Great quality and install was super easy.
After 2000 miles of continuos mountain roads in Puerto Rico I will say that the transmision works perfect . With smooth shifting , and easy to find neutral. I love it