Share to FB

Cruise Drive Primary Bundle

This kit is everything you need to update your cruise drive primary. It includes: 

 

Product Part Number Retail Cost
Comp Sprocket  730-67 or 730-M8 $599
Armored Attitude Adjuster  177-67 $249
Primary Rebuild Kit  PRK or PRK-M8 $119 to $249
Total Cost= $967- 1097

 

Special Bundle Price=$ 870.30 to $987.30 (Savings of $96.70 to $109.70)

Standard Gear Case Finish Examples (Not applicable to all products)

Chrome

Polished

Raw

Wrinkle Black

These example finishes are intended to show the exterior treatments of cases, top covers and doors.

TERMS AND CONDITIONS

BAKER Drivetrain reserves the right to change prices, terms or policies at any time without notice. Orders can be pre-paid using Visa, MasterCard, American Express, Discover or PayPal. All orders not pre-paid will be sent C.O.D. certified check or money order only unless pre-approved for company check acceptance. Any orders from outside the USA must be pre-paid in US funds via wire transfer; a $30 transfer fee will apply. Prices shown are F.O.B. Haslett, MI.

LIMITED WARRANTY POLICY

BAKER™ transmission assemblies and transmission builder 's kits, are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 5 years from the date of purchase or up to 50,000 miles, whichever occurs first. All other BAKER products are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 2 years from the date of purchase or up to 24,000 miles, whichever occurs first, except for the following; Warranty does not cover clutch plate wear, throw out bearing failures or mainshaft breakage due to improper clutch nut installation.Electrical components carry a 30-day warranty; cosmetic finishes (chrome plating, hard anodizing, powder coating) are covered for 60 days. Certain promotional products may carry a shorter warranty as specified at the time of purchase. If the product is found by BAKER to be defective, such products will, at the option of BAKER, be replaced or repaired at cost to BAKER.In the event warranty service is required, the original purchaser must call or write BAKER immediately with a description of the problem. If it is deemed necessary for BAKER to make an evaluation to determine whether the transmission assembly or transmission kit or accessory is defective, the entire transmission assembly, whether originally purchased as an assembly or kit, must be properly packaged and returned prepaid to BAKER with a copy of the original purchase invoice. If after evaluation by BAKER a defect in materials and/or workmanship is found, BAKER will, at their option, repair or replace the defective part of the assembly.

RETURNS AND EXCHANGES

Returns are permitted within 90 days of the delivery date. Any merchandise returned for any reason (exchange, credit or modification) must be accompanied by a Return Goods Authorization (RGA) number or it will be refused. Call BAKER to obtain this number prior to returning goods for any reason. There is a 15% re-stocking fee for all returned items. BAKER is not liable for any shipping.

ADDITIONAL WARRANTY PROVISIONS

NOTE: Limited warranty does not cover labor or other costs or expenses incidental to the repair and or replacement of BAKER products.This warranty does not apply if one or more of the following situations is judged by BAKER to be relevant: BAKER OEM transmissions ; (these are subject to the OEM manufacturers warranty only), Improper installation , accident, modification (including but not limited to use of unauthorized parts, transmission oils or lubricants), racing, high performance application, mishandling, misapplication, neglect (including but not limited to improper maintenance), or improper repair.BAKER shall not be liable for any consequential or incidental damages arising out of or in connection with a BAKER transmission assembly, transmission kit, component or part. Consequential damages shall include without limitation, loss of use, income or profit, or losses sustained as the result of injury (including death) to any person or loss of or damage to property.BAKER transmissions, transmission kits and accessories are designed exclusively for use in American V-Twin motorcycles. BAKER shall have no warranty or liability obligation if BAKER parts are used in any other application.If it is determined that a BAKER product has been disassembled during the warranty period for any reason, this limited warranty will no longer apply unless you were instructed to do so by a BAKER Drivetrain technician for diagnostic purposes.



Cruise Drive Primary Bundle
Move your mouse over image to zoom. Click to enlarge.
Customer Reviews
4.8 Based on 13 Reviews
5 ?
92% 
12
4 ?
0% 
0
3 ?
0% 
0
2 ?
8% 
1
1 ?
0% 
0
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
CF
08/31/2021
Charles F.
United States United States
  • What model motorcycle do you ride? 2012 street glide
AMERICAN MADE !!

Very well made part, as soon as I had taken it out of the box I knew it was built to last. AMERICAN MADE !!! easy to follow instructions, help was a phone call away and I could understand the person on the other end. It’s nice to buy from a company that appreciates your business, and who wants to know if your satisfied with their product or not… thank you !! CHARLES FOLMAR

A
08/29/2021
Anonymous
United States United States
  • What model motorcycle do you ride? 2012 FLHX w/124
You better call them when you order

Received different parts than what was ordered, didn’t receive parts required (shims) delaying the project by a week, was advised to buy parts I didn’t need, didn’t receive instructions and was told to just look them up on the website. Spent hundreds more than necessary and didn’t need or wasn’t able to use half the parts while critical components were missing. The lady who answers customer service PHONE CALLS is awesome. The guys in the receiving end of emails are probably technically great turning a wrench (giving them the benefit of the doubt) but a total waste dealing with customers.

DP
08/20/2021
Danny P.
United States United States
  • What model motorcycle do you ride? 2011 FLHTK
Problem solved

I was on my 2nd Harley compensator and I was sick of the vibration in my left floor board from the compensator and auto chain tensioner. I installed Baker products and my bike is smooth and stress free to ride knowing it’s not coming apart on the road.

JT
05/17/2021
James T.
United States United States
  • What model motorcycle do you ride? 09 harley roadking
Baker is the best

What a difference it made. No more clunk when shifting. The increase in torque is incredible

A
05/09/2021
Anonymous
United States United States
  • What model motorcycle do you ride? 2008 HD FLHX
Works as expected

Starter noise and primary noise are eliminated! Bike shifts smoother and ride seems to have less vibration and noise than prior to installation.

Web Product ID: 1429888925774
Baker Drivetrain Team Illustration