Share to FB

Replacement Neutral Switch

Replacement neutral switches that have been tested to be dependable. See the next "Fitment" tab to identify which is for the application that you need.
  1. Application 1: PN 21-436 (Fitment - 2005-2010 Big Dog Transmissions )

  2. Application 2: PN 21-438 Fitment – TorqueBox, 5-speed Ignition Kill, DD6 (1990-1997
    applications), DD6 Reverse, F5R (1998-1999 applications) 

  3. Application  3: PN 21-458P (Fitment - F5R (1990-1997 and 2000-2006 applications)

  4. Application 4: PN 33900-59 (Fits 86-98 XL, 59-64 FL, 73-79 FL/FX, 86 FXST, 87-97 FLT/ FXR/ FXST/ FLST)

  5. Application 5: PN 33902-98 (Fits Softail 98-99, And Dyna 98-2000, 95-00 FLT)

  6. Application 6: PN 33904-00 (Fits 01-06 Big Twin except 06 Dyna)

  7. Application 7: PN 33926-06B (Fits FXST 2007-UP, FLST 2007-UP, FLT 2007-UP, FXD 2005-UP)

TERMS AND CONDITIONS

BAKER Drivetrain reserves the right to change prices, terms or policies at any time without notice. Orders can be pre-paid using Visa, MasterCard, American Express, Discover or PayPal. All orders not pre-paid will be sent C.O.D. certified check or money order only unless pre-approved for company check acceptance. Any orders from outside the USA must be pre-paid in US funds via wire transfer; a $30 transfer fee will apply. Prices shown are F.O.B. Haslett, MI.

LIMITED WARRANTY POLICY

BAKER™ transmission assemblies and transmission builder 's kits, are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 5 years from the date of purchase or up to 50,000 miles, whichever occurs first. All other BAKER products are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 2 years from the date of purchase or up to 24,000 miles, whichever occurs first, except for the following; Warranty does not cover clutch plate wear, throw out bearing failures or mainshaft breakage due to improper clutch nut installation.Electrical components carry a 30-day warranty; cosmetic finishes (chrome plating, hard anodizing, powder coating) are covered for 60 days. Certain promotional products may carry a shorter warranty as specified at the time of purchase. If the product is found by BAKER to be defective, such products will, at the option of BAKER, be replaced or repaired at cost to BAKER.In the event warranty service is required, the original purchaser must call or write BAKER immediately with a description of the problem. If it is deemed necessary for BAKER to make an evaluation to determine whether the transmission assembly or transmission kit or accessory is defective, the entire transmission assembly, whether originally purchased as an assembly or kit, must be properly packaged and returned prepaid to BAKER with a copy of the original purchase invoice. If after evaluation by BAKER a defect in materials and/or workmanship is found, BAKER will, at their option, repair or replace the defective part of the assembly.

RETURNS AND EXCHANGES

Returns are permitted within 30 days of the delivery date. Any merchandise returned for any reason (exchange, credit or modification) must be accompanied by a Return Goods Authorization (RGA) number or it will be refused. Call BAKER to obtain this number prior to returning goods for any reason. There is a 15% re-stocking fee for all returned items. BAKER is not liable for any shipping.

ADDITIONAL WARRANTY PROVISIONS

NOTE: Limited warranty does not cover labor or other costs or expenses incidental to the repair and or replacement of BAKER products.This warranty does not apply if one or more of the following situations is judged by BAKER to be relevant: BAKER OEM transmissions ; (these are subject to the OEM manufacturers warranty only), Improper installation , accident, modification (including but not limited to use of unauthorized parts, transmission oils or lubricants), racing, high performance application, mishandling, misapplication, neglect (including but not limited to improper maintenance), or improper repair. BAKER shall not be liable for any consequential or incidental damages arising out of or in connection with a BAKER transmission assembly, transmission kit, component or part. Consequential damages shall include without limitation, loss of use, income or profit, or losses sustained as the result of injury (including death) to any person or loss of or damage to property.BAKER transmissions, transmission kits and accessories are designed exclusively for use in American V-Twin motorcycles. BAKER shall have no warranty or liability obligation if BAKER parts are used in any other application.If it is determined that a BAKER product has been disassembled during the warranty period for any reason, this limited warranty will no longer apply unless you were instructed to do so by a BAKER Drivetrain technician for diagnostic purposes.



Replacement Neutral Switch
Move your mouse over image to zoom. Click to enlarge.
Customer Reviews
4.2 Based on 5 Reviews
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
A
03/24/2020
Anonymous
United States United States
  • What model motorcycle do you ride? 1999 dresser 5 speed
wrong part

Tech advisor quoted incorrect application.

JP
12/16/2019
Joseph P.
United States United States
  • What model motorcycle do you ride? 2002 Roadglide FLTR
Replacement neutral switch

Switch seems to work fine, but I’m getting a neutral light flash when shifting into 5th gear. Of course we know the top lid of the trans is not doweled so it could be alignment is off a bit. Not a problem for me.

B
02/16/2019
Bernard
United States
  • What model motorcycle do you ride? 2003 Big Dog Mastiff
Neutral Switch

Great product. Mine had eyelet to connect the wires and the replacement had spades. No big deal. Works great.

HM
07/16/2018
Harry M.
United States
shines like chrom .

It felt to me spring pressure against ball was more than the stock one. Also a bit of cleaner and it sparkles.

GW
01/07/2018
Greg W.
United States
Perfect Switch

I put this switch in my 2001 FLHTCI 5 speed transmission. It was very easy to take the old one out and reinstall this one in its place. Seems to work very well, and I no longer have the neutral issues that I was having with the original one.

Web Product ID: 10172748302
Baker Drivetrain Team Illustration
Replacement neutral switches that have been tested to be dependable. See the next "Fitment" tab to identify which is for the application that you need.
  1. Application 1: PN 21-436 (Fitment - 2005-2010 Big Dog Transmissions )

  2. Application 2: PN 21-438 Fitment – TorqueBox, 5-speed Ignition Kill, DD6 (1990-1997
    applications), DD6 Reverse, F5R (1998-1999 applications) 

  3. Application  3: PN 21-458P (Fitment - F5R (1990-1997 and 2000-2006 applications)

  4. Application 4: PN 33900-59 (Fits 86-98 XL, 59-64 FL, 73-79 FL/FX, 86 FXST, 87-97 FLT/ FXR/ FXST/ FLST)

  5. Application 5: PN 33902-98 (Fits Softail 98-99, And Dyna 98-2000, 95-00 FLT)

  6. Application 6: PN 33904-00 (Fits 01-06 Big Twin except 06 Dyna)

  7. Application 7: PN 33926-06B (Fits FXST 2007-UP, FLST 2007-UP, FLT 2007-UP, FXD 2005-UP)

TERMS AND CONDITIONS

BAKER Drivetrain reserves the right to change prices, terms or policies at any time without notice. Orders can be pre-paid using Visa, MasterCard, American Express, Discover or PayPal. All orders not pre-paid will be sent C.O.D. certified check or money order only unless pre-approved for company check acceptance. Any orders from outside the USA must be pre-paid in US funds via wire transfer; a $30 transfer fee will apply. Prices shown are F.O.B. Haslett, MI.

LIMITED WARRANTY POLICY

BAKER™ transmission assemblies and transmission builder 's kits, are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 5 years from the date of purchase or up to 50,000 miles, whichever occurs first. All other BAKER products are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 2 years from the date of purchase or up to 24,000 miles, whichever occurs first, except for the following; Warranty does not cover clutch plate wear, throw out bearing failures or mainshaft breakage due to improper clutch nut installation.Electrical components carry a 30-day warranty; cosmetic finishes (chrome plating, hard anodizing, powder coating) are covered for 60 days. Certain promotional products may carry a shorter warranty as specified at the time of purchase. If the product is found by BAKER to be defective, such products will, at the option of BAKER, be replaced or repaired at cost to BAKER.In the event warranty service is required, the original purchaser must call or write BAKER immediately with a description of the problem. If it is deemed necessary for BAKER to make an evaluation to determine whether the transmission assembly or transmission kit or accessory is defective, the entire transmission assembly, whether originally purchased as an assembly or kit, must be properly packaged and returned prepaid to BAKER with a copy of the original purchase invoice. If after evaluation by BAKER a defect in materials and/or workmanship is found, BAKER will, at their option, repair or replace the defective part of the assembly.

RETURNS AND EXCHANGES

Returns are permitted within 30 days of the delivery date. Any merchandise returned for any reason (exchange, credit or modification) must be accompanied by a Return Goods Authorization (RGA) number or it will be refused. Call BAKER to obtain this number prior to returning goods for any reason. There is a 15% re-stocking fee for all returned items. BAKER is not liable for any shipping.

ADDITIONAL WARRANTY PROVISIONS

NOTE: Limited warranty does not cover labor or other costs or expenses incidental to the repair and or replacement of BAKER products.This warranty does not apply if one or more of the following situations is judged by BAKER to be relevant: BAKER OEM transmissions ; (these are subject to the OEM manufacturers warranty only), Improper installation , accident, modification (including but not limited to use of unauthorized parts, transmission oils or lubricants), racing, high performance application, mishandling, misapplication, neglect (including but not limited to improper maintenance), or improper repair. BAKER shall not be liable for any consequential or incidental damages arising out of or in connection with a BAKER transmission assembly, transmission kit, component or part. Consequential damages shall include without limitation, loss of use, income or profit, or losses sustained as the result of injury (including death) to any person or loss of or damage to property.BAKER transmissions, transmission kits and accessories are designed exclusively for use in American V-Twin motorcycles. BAKER shall have no warranty or liability obligation if BAKER parts are used in any other application.If it is determined that a BAKER product has been disassembled during the warranty period for any reason, this limited warranty will no longer apply unless you were instructed to do so by a BAKER Drivetrain technician for diagnostic purposes.