$ 795.00
Keep your 2009-2016 Touring Model cool. Todays Big Twin engine makes a lot more power and a lot more heat than its predecessor of 20 years ago. In 1993, the...
$ 262.80 $ 365.00
ALUMINUM ALLOY RACE PULLEYS BAKER race pulleys are the lightest pulleys available. A stock 32 tooth Harley pulley weighs 5.2 lbs and our 32 tooth race pulley weights 2.0 lbs;...
$ 292.00 $ 365.00
ALUMINUM ALLOY RACE PULLEYS BAKER race pulleys are the lightest pulleys available. A stock 32 tooth Harley pulley weighs 5.2 lbs and our 32 tooth race pulley weights 2.0 lbs;...
$ 21.00
If you need to cap off the speedo sensor hole for whatever reason, you need this plug. Some other companies do this with a steel plate and a gasket, just...
$ 292.00 $ 365.00
ALUMINUM ALLOY RACE PULLEYS BAKER race pulleys are the lightest pulleys available. A stock 32 tooth Harley pulley weighs 5.2 lbs and our 32 tooth race pulley weights 2.0 lbs;...
$ 292.00 $ 365.00
ALUMINUM ALLOY RACE PULLEYS BAKER race pulleys are the lightest pulleys available. A stock 32 tooth Harley pulley weighs 5.2 lbs and our 32 tooth race pulley weights 2.0 lbs;...
$ 129.00
BAKER Drivetrain unveils the final solution to the late model compensator problems. The BAKER Drivetrain compensator sprocket is engineered with an annular oil distribution system that scavenges primary oil and...
Call Us! 517-339-3835
LIMITED AVAILABILITY! GIVE US A CALL AT 517-339-3835 TO ORDER YOUR 4-SPEED TRANSMISSION NOW! Favored by those inspired by the old-school cool, garage builders and riders of the nostalgic...
$ 4,395.00
Made to satisfy the old school tendencies while providing the ability to run reasonable RPM’s at highway speeds. Panhead and Shovelhead riders will love the ability to ride hard with...
$ 249.00
The stock ratchet pawl used from 1980 to 2000 utilized scissor spring that was well known for breaking. The unfortunate side effect of this failure is the broken spring leg...
$ 299.00
Stronger than the original for those with more abusive inclinations! The BAKER Armored Attitude Adjuster is an insurance policy for your motorcycle in the form of a manual chain tensioner...
$ 139.00
Our simple, sleek and clean show polished speedometer sensor keeps a stylish low profile to the transmission case. For those with an attention to detail, this is certainly a noticeable...
$ 170.00
The Clutch Release Arm Kit is needed in order to run your stock style clutch cable setup, features a 10-degree release arm to clear a modern starter along with a...
$ 159.00
This is a service tool kit in order to remove the stock countershaft bearing in 2007-Later Harleys. P/N ToolE-07 Fitment 2006-Later Dyna and 2007-Later Touring & Softail Benefits This...
$ 1,850.00
This discounted bundle will help repair your stock Cruise Drive transmission. Normally, these parts would cost: Part Normal Retail Cost Primary Rebuild Kit $149 for M8 applications Street Door $395...
$ 2,495.00
Our BAKER DD5 is not just a replacement for the stock 5-speed. Whether you’re going down the drag strip or you’re cruising down the road, the torque capacity, long-term durability,...
$ 3,695.00 $ 3,695.00
Our BAKER DD5 is not just a replacement for the stock 5-speed. Whether you’re going down the drag strip or you’re cruising down the road, the torque capacity, long-term durability,...
$ 3,195.00
* Limited supply of chrome bearing doors with ear available. Please give us a call at 517-339-3835 to order a chrome bearing door. From an engineering standpoint, it is difficult...
$ 4,395.00
* Limited supply of chrome bearing doors available. Please give us a call at 517-339-3835 to order a chrome bearing door. If you enjoy riding for long periods of time...
$ 995.00
Heal your Achilles heel with the BAKER Main Drive Gear Bearing Kit for the BAKER Direct Drive 7-Speed. P/N 740-67 Kit includes BAKER double tapered roller bearing assembly Replacement DD7 main...
$ 3,695.00
The DD7 upgrades any existing 2006-later big twin 6 speed to a full 7 speed transmission. The BAKER DD7 is more than just another gear added to the mix for...
$ 4,895.00
This is for a complete transmission, case and all. The sprocket/pulley is not included in the complete transmission assembly. For the acquisition of these components, kindly contact BAKER Drivetrain at...
$ 395.00
Sprocket for the 1985-2006 (except 06 Dyna) compensator. Sprocket & Chain Matrix Features American made heat treated sprockets, which will help with torque increases. 22 tooth 14% increase BenefitsIt’s...
$ 48.00
Inner fairing switches to mount onto the bike to activate the F5R. Features Rubber boots Fitment FLT/ FLH Inner Fairing, Custom Location Detail Standard configuration unless ordered otherwise PN: FRNG-MNT
$ 2,695.00
Designed, manufactured, tested, proven and beloved - the industry's leading reverse drive for Harley-Davidson is the easiest to use and most worry-free system. Our non-invasive reverse gear system was designed...
$ 159.00
The BAKER primary chain adjuster bracket looks like the stock 39990-01 style bracket but has 28% more adjuster teeth. The finer pitch teeth make it easier to dial in your...
$ 3,695.00
The GrudgeBox is a tough overdrive 6-speed to replace your stock 6-speed! The GrudgeBox was engineered with a focus on excessive torque capacity and crisp shifting. All gears are straight...
$ 99.00
People have been griping about the 37311-75 throwout bearing since it was introduced into Big Twins in 1975. Failures occur when the clutch cable is inadvertently adjusted with little to no...
$ 479.00
'07-'17 Fitment Taking design cues from our ever increasing product family known as Function Formed, we have wrapped the outer design around the functional components found inside. No garnish, or...
$ 359.00
This slick 5-speed left side drive ignition kill shift kit from BAKER Drivetrain was developed for one thing in mind, Winning! Anybody who wants to launch hard and then up...
$ 349.00
The N1 Shift Drums have a 0-down all-up shifting pattern and eliminate any possibility of catching neutral on aggressive 1-2 shifts. Neutral is below 1st. The N1 drum is also...
$ 3,195.00
This is the ORIGINAL 6-speed design that revolutionized the American V-Twin industry. Yet, it’s still the best overdrive 6-speed built to this day…hands down. Our OD6 is built to comfortably...
$ 40.00
If you install a high horsepower starter motor on your 1993-2006 FLT-FLH, the oil spout will interfere with the end of the starter motor. Our spout spacer kit moves the...
$ 49.00
Replacement Fat Shoe for special applications. Fitment: Please refer to the Sprocket/Chain Matrix in order to figure out fitment. PN DD6-178
$ 119.00
This all-inclusive convenient kit is designed to freshen up those high mileage bikes, prevent leakage, and includes everything you’ll need after opening up your primary. Includes gaskets, seals and O-rings....
$ 23.97
Picking the right transmission fluid ensures the life and durability of your transmission, that’s why BAKER recommends a fully synthetic GL-5 rated gear weight oil of 75W-140.The Red Line Heavy...
$ 9.99
This is a replacement main drive gear bore end seal. It's great! Fitment Size: 25 x 32 x 06
$ 14.25
Replacement neutral switches that have been tested to be dependable. See the next "Fitment" tab to identify which is for the application that you need. Fitment Application 1: PN 21-436 (Fitment...
$ 6.99
This is a replacement pawl shaft seal that we found to last the longest. Fitment Size 4.37 x .875 x .25
$ 140.00
We highly recommend the +1 Oil Pan for S&S© T124 applications. It makes a lot of power and a lot of heat. The oil feed and return on the right...
$ 20.00
Picking the right transmission fluid ensures the life and durability of your transmission, that’s why BAKER recommends a fully synthetic GL-5 rated gear weight oil of 75W-140. The Spectro Heavy...
$ 13.00
Picking the right primary fluid ensures the life and durability of your primary, that’s why BAKER recommends a 85W primary oil like the Spectro Heavy Duty Primary Oil. This Spectro...
$ 169.00
Starting in 1994, the factory started using electronic speedos on some of the models. Today, all models use this. If you are changing the transmission pulley, rear wheel pulley, rear...
$ 395.00
The Street Door is manufactured with 6061-T6 aluminum and features 28% wider bearings over stock. The bearings are retained with a 6-bolt steel 1/8″ plate, phantom clutch lever movement is...
$ 299.00
The NEW BAKER Cable-Type Side Cover was designed with minimal waste and purposeful mechanical intent. Machined from certified 6061-T6 Billet Aluminum, compatible with OEM or aftermarket transmissions. The BAKER Cable-Type...
$ 29.00
Have you ever heard of a 5-speed transmission dipstick breaking off and working its way into the gearbox with disastrous results? Ask any seasoned technician; he’s seen one. The low...
$ 379.00
Features This kit was put together to assist you with that high mileage rebuild. When your transmission has reached its limit of efficiency and smooth shifting, it’s time for that...