Clutch Pack Kits for BAKER clutches
BAKER Clutch Pack Replacement Kits contain all necessary fiber and steel plates to restore like new performance to your BAKER clutch. These are original equipment plates which will yield proper stack height and trouble free operation.
The most critical part of installing new clutch plates is getting the clutch stack height right. If the stack height is short, your new clutch will slip. To get the right stack height we sort through hundreds of plates and dimensionally select the right combination of plates to yield the right stack height. Final height check is verified (+/-.005”) on granite plate with a height guage and a 50 lb cylindrical weight sitting on top of the stack to simulate the pressure plate load.
9-Plate Clutch Stack for Big Dog 2005-2010
OEM replacement 9-plate clutch stack, pre-measured to a height of 1.960″, fits Big Dog models from 2005-2010. Replacement clutch stack can be used as a direct replacement for both existing 9-plate and 12-plate clutch configurations. If switching from a 12-plate stack to a 9-plate stack, you must also update the inner and outer ball and ramp assembly located in the pulley cover, for more information, please contact the BAKER Drivetrain tech department.
Please refer to our Sprocket/Chain Matrix in order to find the correct pitch chain for your setup.
Listed in the options (above) as you buy:
These example finishes are intended to show the exterior treatments of cases, top covers and doors.
TERM AND CONDITIONS
LIMITED WARRANTY POLICY
BAKER™ transmission assemblies, transmission kits, primaries, and oil pans are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 5 years from the date of purchase or up to 50,000 miles. BAKER™ clutches, kicker cover kits, belt drives, F6F kit, reverse systems, covers and accessories are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 2 years from the date of purchase or up to 24,000 miles - whichever occurs first. If the product is found by BAKER™ to be defective, such products will, at the option of BAKER™, be replaced or repaired at cost to BAKER™.
In the event warranty service is required, the original purchaser must call or write BAKER™ immediately with a description of the problem. If it is deemed necessary for BAKER™ to make an evaluation to determine whether the transmission assembly or transmission kit or accessory is defective, the entire transmission assembly, whether originally purchased as an assembly or kit, must be properly packaged and returned prepaid to BAKER™ with a copy of the original invoice of purchase. If after an evaluation has been made by BAKER™ and a defect in materials and/or workmanship is found, BAKER™ will, at BAKER™ option, repair or replace the defective part of the assembly.
WARRANTIES FOR "INSIDER SPECIAL" PRODUCTS
Due to the uniqueness, low price and assembly outside of typical production process of products indicated as Insider Special products, purchasing these Insider Special products include a warranty so to guarantee the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 1 year from the date of purchase or up to 12,000 miles. We have provided extended options for you to purchase below.
RETURNS AND EXCHANGES
Any merchandise returned for any reason (exchange, credit or modification) must be accompanied by a Return Goods Authorization (RGA) number or it will be refused. Call BAKER™ to obtain this number prior to returning goods for any reason. There is a 15% re-stocking fee for all returned items. BAKER™ is not liable for any shipping charges.
ADDITIONAL WARRANTY PROVISIONS
NOTE: Limited warranty does not cover labor or other costs or expenses incidental to the repair and or replacement of BAKER™ products.
This warranty does not apply if one or more of the following situations is judged by BAKER™ to be relevant: BAKER™ OEM transmissions; (these are subject to the OEM manufactures warranty only), Improper installation, accident, modification (including but not limited to use of unauthorized parts, transmission oils or lubricants), racing, high performance application, mishandling, misapplication, neglect (including but not limited to improper maintenance), or improper repair.
BAKER™ shall not be liable for any consequential or incidental damages arising out of or in connection with a BAKER™ transmission assembly, transmission kit, component or part. Consequential damages shall include without limitation, loss of use, income or profit, or losses sustained as the result of injury (including death) to any person or loss of or damage to property.
BAKER™ transmissions, transmission kits and accessories are designed exclusively for use in American V-Twin motorcycles. BAKER™ shall have no warranty or liability obligation if BAKER™ parts are used in any other application.
If it is determined that a BAKER™ product has been disassembled during the warranty period for any reason, this limited warranty will no longer apply unless you were instructed to do so by a BAKER Drivetrain technician for diagnostic purposes.
The words H-D®, Softail®, FXR®, Dyna®, FLT®, FLH®, Sportster®, and Buell® are registered trademarks and are for reference only.
Ordered a 9 plate clutch pack for my Big Dog. Clicked on Bog Dog parts and accessories took me to a dropdown menu which i selected Baker 9 plate and specified in the comment section provided that is was for a 2008 Big Dog. I received the wrong clutch pack and when I called to inquire they advised I ordered one for the performance clutch. Then I called to inquire about the issue, was told someone would call me right back which they didn't. When I called again I was able to get ahold of someone and they were going to send me out the correct part. I paid for all restock fees/shipping on everything. Not happy with the overall experience. I'm sure they do a good job overall however this was my only, and unfortunately somewhat negative contact with them.
This was a fix from another shop . Baker had all the info on the big dog clutch not the first I have done with there parts and happy customers are what a shop is about Baker parts make it easy thanks for your support and great parts
Works Great, the one I got from you back on October of 2015 did not work as these one did. Reason being was that the steels were not the same thickness as they should on the Instruction page. I only got one .121 and there should have been two. I all the rest were .59 and not a single .79. I was loose and had issues. With the new one I just recieved I measure the steels to make sure we were on the same page and wa la the did it man. Thanks for sending the right one, I should have returned the other clutch pack but I felt that I had installed it and it was my bad for not checking the order before I installed it. I am Okay with that. Thanks for your help. Carlos