Share to FB

Replacement Clutch Pack Kits

Clutch Pack Kits for BAKER clutches
BAKER Clutch Pack Replacement Kits contain all necessary fiber and steel plates to restore like new performance to your BAKER clutch. These are original equipment plates which will yield proper stack height and trouble free operation.

The most critical part of installing new clutch plates is getting the clutch stack height right. If the stack height is short, your new clutch will slip. To get the right stack height we sort through hundreds of plates and dimensionally select the right combination of plates to yield the right stack height. Final height check is verified (+/-.005”) on granite plate with a height guage and a 50 lb cylindrical weight sitting on top of the stack to simulate the pressure plate load.

9-Plate Clutch Stack for Big Dog 2005-2010
OEM replacement 9-plate clutch stack, pre-measured to a height of 1.960″, fits Big Dog models from 2005-2010. Replacement clutch stack can be used as a direct replacement for both existing 9-plate and 12-plate clutch configurations. If switching from a 12-plate stack to a 9-plate stack, you must also update the inner and outer ball and ramp assembly located in the pulley cover, for more information, please contact the BAKER Drivetrain tech department.

  • Proper stack height
  • BAKER OEM plates
  • Replacement clutch plates made from the highest quality fiber and steel
  • BAKER 9-Plate Street Clutch
  • BAKER King Kong Clutch
  • BAKER Synchonous Belt Drive Clutch
  • 2005-2010 Big Dog (By BAKER)

Please refer to our Sprocket/Chain Matrix in order to find the correct pitch chain for your setup.

Listed in the options (above) as you buy:

Other Upgrades:

 

Standard Gear Case Finish Examples (Not applicable to all products)

Raw

Polished

Wrinkle Black

These example finishes are intended to show the exterior treatments of cases, top covers and doors.

TERMS AND CONDITIONS

BAKER Drivetrain reserves the right to change prices, terms or policies at any time without notice. Orders can be pre-paid using Visa, MasterCard, American Express, Discover or PayPal. All orders not pre-paid will be sent C.O.D. certified check or money order only unless pre-approved for company check acceptance. Any orders from outside the USA must be pre-paid in US funds via wire transfer; a $30 transfer fee will apply. Prices shown are F.O.B. Haslett, MI.

LIMITED WARRANTY POLICY

BAKER™ transmission assemblies and transmission builder 's kits, are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 5 years from the date of purchase or up to 50,000 miles, whichever occurs first. All other BAKER products are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 2 years from the date of purchase or up to 24,000 miles, whichever occurs first, except for the following; Warranty does not cover clutch plate wear, throw out bearing failures or mainshaft breakage due to improper clutch nut installation.Electrical components carry a 30-day warranty; cosmetic finishes (chrome plating, hard anodizing, powder coating) are covered for 60 days. Certain promotional products may carry a shorter warranty as specified at the time of purchase. If the product is found by BAKER to be defective, such products will, at the option of BAKER, be replaced or repaired at cost to BAKER.In the event warranty service is required, the original purchaser must call or write BAKER immediately with a description of the problem. If it is deemed necessary for BAKER to make an evaluation to determine whether the transmission assembly or transmission kit or accessory is defective, the entire transmission assembly, whether originally purchased as an assembly or kit, must be properly packaged and returned prepaid to BAKER with a copy of the original purchase invoice. If after evaluation by BAKER a defect in materials and/or workmanship is found, BAKER will, at their option, repair or replace the defective part of the assembly.

RETURNS AND EXCHANGES

Returns are permitted within 90 days of the delivery date. Any merchandise returned for any reason (exchange, credit or modification) must be accompanied by a Return Goods Authorization (RGA) number or it will be refused. Call BAKER to obtain this number prior to returning goods for any reason. There is a 15% re-stocking fee for all returned items. BAKER is not liable for any shipping.

ADDITIONAL WARRANTY PROVISIONS

NOTE: Limited warranty does not cover labor or other costs or expenses incidental to the repair and or replacement of BAKER products.This warranty does not apply if one or more of the following situations is judged by BAKER to be relevant: BAKER OEM transmissions ; (these are subject to the OEM manufacturers warranty only), Improper installation , accident, modification (including but not limited to use of unauthorized parts, transmission oils or lubricants), racing, high performance application, mishandling, misapplication, neglect (including but not limited to improper maintenance), or improper repair.BAKER shall not be liable for any consequential or incidental damages arising out of or in connection with a BAKER transmission assembly, transmission kit, component or part. Consequential damages shall include without limitation, loss of use, income or profit, or losses sustained as the result of injury (including death) to any person or loss of or damage to property.BAKER transmissions, transmission kits and accessories are designed exclusively for use in American V-Twin motorcycles. BAKER shall have no warranty or liability obligation if BAKER parts are used in any other application.If it is determined that a BAKER product has been disassembled during the warranty period for any reason, this limited warranty will no longer apply unless you were instructed to do so by a BAKER Drivetrain technician for diagnostic purposes.



Replacement Clutch Pack Kits
Move your mouse over image to zoom. Click to enlarge.
Replacement Clutch Pack Kits Replacement Clutch Pack Kits
Customer Reviews
4.8 Based on 8 Reviews
5 ★
88% 
7
4 ★
0% 
0
3 ★
12% 
1
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • Customer Service
  • gaskets everything
  • quality
  • parts
  • stock
LB
09/10/2022
Larry B.
United States
  • What model motorcycle do you ride? 1982 FXR

Clutch plates

Took it to the drags. Ran 11.6 @115.98 mph and it held up well

DW
04/30/2021
DAVID W.
United States United States
  • What model motorcycle do you ride? 2007 BIG DOG K9

DIRECT REPLACEMENT

PARTS SHIPPED FAST AND IN STOCK!

M
02/27/2021
McKercher
United States United States
  • What model motorcycle do you ride? Harley

Best stuff you can buy

Really good customer service got me all gaskets everything I needed definitely recommended highly

GC
12/22/2020
Gary C.
United States United States
  • What model motorcycle do you ride? 2007 Big dog chopper

12 plate clutch kit

Top quality made parts excellent customer service

BS
05/11/2020
Blaine S.
United States United States

new clutch pac

simple install just like new

Web Product ID: 9201139278
Baker Drivetrain Team Illustration