Share to FB

Replacement Sprocket Spacer Seal

This is a replacement sprocket spacer seal that we found lasts longest.

2.219 x 3.375 x 0.266

PN 12067B

Standard Gear Case Finish Examples (Not applicable to all products)

Raw

Polished

Wrinkle Black

These example finishes are intended to show the exterior treatments of cases, top covers and doors.

TERMS AND CONDITIONS

BAKER Drivetrain reserves the right to change prices, terms or policies at any time without notice. Orders can be pre-paid using Visa, MasterCard, American Express, Discover or PayPal. All orders not pre-paid will be sent C.O.D. certified check or money order only unless pre-approved for company check acceptance. Any orders from outside the USA must be pre-paid in US funds via wire transfer; a $30 transfer fee will apply. Prices shown are F.O.B. Haslett, MI.

LIMITED WARRANTY POLICY

BAKER™ transmission assemblies and transmission builder 's kits, are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 5 years from the date of purchase or up to 50,000 miles, whichever occurs first. All other BAKER products are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 2 years from the date of purchase or up to 24,000 miles, whichever occurs first, except for the following; Warranty does not cover clutch plate wear, throw out bearing failures or mainshaft breakage due to improper clutch nut installation.Electrical components carry a 30-day warranty; cosmetic finishes (chrome plating, hard anodizing, powder coating) are covered for 60 days. Certain promotional products may carry a shorter warranty as specified at the time of purchase. If the product is found by BAKER to be defective, such products will, at the option of BAKER, be replaced or repaired at cost to BAKER.In the event warranty service is required, the original purchaser must call or write BAKER immediately with a description of the problem. If it is deemed necessary for BAKER to make an evaluation to determine whether the transmission assembly or transmission kit or accessory is defective, the entire transmission assembly, whether originally purchased as an assembly or kit, must be properly packaged and returned prepaid to BAKER with a copy of the original purchase invoice. If after evaluation by BAKER a defect in materials and/or workmanship is found, BAKER will, at their option, repair or replace the defective part of the assembly.

RETURNS AND EXCHANGES

Returns are permitted within 90 days of the delivery date. Any merchandise returned for any reason (exchange, credit or modification) must be accompanied by a Return Goods Authorization (RGA) number or it will be refused. Call BAKER to obtain this number prior to returning goods for any reason. There is a 15% re-stocking fee for all returned items. BAKER is not liable for any shipping.

ADDITIONAL WARRANTY PROVISIONS

NOTE: Limited warranty does not cover labor or other costs or expenses incidental to the repair and or replacement of BAKER products.This warranty does not apply if one or more of the following situations is judged by BAKER to be relevant: BAKER OEM transmissions ; (these are subject to the OEM manufacturers warranty only), Improper installation , accident, modification (including but not limited to use of unauthorized parts, transmission oils or lubricants), racing, high performance application, mishandling, misapplication, neglect (including but not limited to improper maintenance), or improper repair.BAKER shall not be liable for any consequential or incidental damages arising out of or in connection with a BAKER transmission assembly, transmission kit, component or part. Consequential damages shall include without limitation, loss of use, income or profit, or losses sustained as the result of injury (including death) to any person or loss of or damage to property.BAKER transmissions, transmission kits and accessories are designed exclusively for use in American V-Twin motorcycles. BAKER shall have no warranty or liability obligation if BAKER parts are used in any other application.If it is determined that a BAKER product has been disassembled during the warranty period for any reason, this limited warranty will no longer apply unless you were instructed to do so by a BAKER Drivetrain technician for diagnostic purposes.



Replacement Sprocket Spacer Seal
Move your mouse over image to zoom. Click to enlarge.
Customer Reviews
5.0 Based on 4 Reviews
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
SK
04/17/2021
Sean K.
United States
  • What model motorcycle do you ride? 1982 FXRS
Just a seal.....

Yeah, it's just a seal, but it takes hours to replace if it leaks. Best to get the best you can, something that's going to last - this is it.

A
12/27/2020
Anonymous
United States United States
  • What model motorcycle do you ride? 1991 Harley FXLR and 1999 FatBoy
Baker Products Are the Best.

Good seal, Baker Tech Support told me exactly how to install. No Issues. It's Great. You can be assured Baker is the best on the Market for upgrades to your Bike.... Both my Bikes have the Baker OD6 Speed....!!!

BAKER Drivetrain Replacement Sprocket Spacer Seal Review
DB
10/19/2019
Dave B.
United States United States
  • What model motorcycle do you ride? BigDog Mastiff 2004
Happy

Part worked just like it was supposed to

TF
02/16/2019
Thomas F.
United States
  • What model motorcycle do you ride? I have an 06 electra glide that's 130hp an most stock Harley stuff that failed replaced with baker
Baker is a good replacement for harley

I've upgraded a lot of things on my bike with baker stuff and have been really happy with everything so far!

Web Product ID: 10172639310
Baker Drivetrain Team Illustration