Share to FB

Early Model Comp Sprocket

Sprocket for the 1985-2006 (except 06 Dyna) compensator.

 

Sprocket & Chain Matrix

  • American made heat treated sprockets, which will help with torque increases.
  • 22 tooth 14% increase

Benefits
It’s common knowledge that engine upgrades like a cam, carburetor, or bigger cubes can increase torque to the rear wheel. But the easiest and most inexpensive way to increase torque to the rear wheel, with no sacrifice in dependability, is to change your primary gearing by changing the compensating sprocket.

Includes the sprocket only. You have a stock 1999 carbureted Road King. By going from a stock 25 to a BAKER 22 tooth compensating sprocket, the torque at the rear wheel will increase by 14%. This eliminates the overall drive ratio performance advantage of fuel injected Road Kings. Changing the primary drive ratio affects the overall torque multiplication to the rear wheel. Decreasing the number of teeth on the compensating sprocket increases torque to the rear wheel and improves acceleration and performance. The trade-off for this performance improvement is an increase in the highway cruising RPM with no transmission change. If a BAKER 6-speed transmission is installed along with a new compensating sprocket, the increase in performance will be realized along with a lower highway cruising RPM than with a stock 5-speed.

 Instructions

Sprocket & Chain Matrix

TERMS AND CONDITIONS

BAKER Drivetrain reserves the right to change prices, terms or policies at any time without notice. Orders can be pre-paid using Visa, MasterCard, American Express, Discover or PayPal. All orders not pre-paid will be sent C.O.D. certified check or money order only unless pre-approved for company check acceptance. Any orders from outside the USA must be pre-paid in US funds via wire transfer; a $30 transfer fee will apply. Prices shown are F.O.B. Haslett, MI.

LIMITED WARRANTY POLICY

BAKER™ transmission assemblies and transmission builder 's kits, are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 5 years from the date of purchase or up to 50,000 miles, whichever occurs first. All other BAKER products are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 2 years from the date of purchase or up to 24,000 miles, whichever occurs first, except for the following; Warranty does not cover clutch plate wear, throw out bearing failures or mainshaft breakage due to improper clutch nut installation.Electrical components carry a 30-day warranty; cosmetic finishes (chrome plating, hard anodizing, powder coating) are covered for 60 days. Certain promotional products may carry a shorter warranty as specified at the time of purchase. If the product is found by BAKER to be defective, such products will, at the option of BAKER, be replaced or repaired at cost to BAKER.In the event warranty service is required, the original purchaser must call or write BAKER immediately with a description of the problem. If it is deemed necessary for BAKER to make an evaluation to determine whether the transmission assembly or transmission kit or accessory is defective, the entire transmission assembly, whether originally purchased as an assembly or kit, must be properly packaged and returned prepaid to BAKER with a copy of the original purchase invoice. If after evaluation by BAKER a defect in materials and/or workmanship is found, BAKER will, at their option, repair or replace the defective part of the assembly.

RETURNS AND EXCHANGES

Returns are permitted within 30 days of the delivery date. Any merchandise returned for any reason (exchange, credit or modification) must be accompanied by a Return Goods Authorization (RGA) number or it will be refused. Call BAKER to obtain this number prior to returning goods for any reason. There is a 15% re-stocking fee for all returned items. BAKER is not liable for any shipping.

ADDITIONAL WARRANTY PROVISIONS

NOTE: Limited warranty does not cover labor or other costs or expenses incidental to the repair and or replacement of BAKER products.This warranty does not apply if one or more of the following situations is judged by BAKER to be relevant: BAKER OEM transmissions ; (these are subject to the OEM manufacturers warranty only), Improper installation , accident, modification (including but not limited to use of unauthorized parts, transmission oils or lubricants), racing, high performance application, mishandling, misapplication, neglect (including but not limited to improper maintenance), or improper repair. BAKER shall not be liable for any consequential or incidental damages arising out of or in connection with a BAKER transmission assembly, transmission kit, component or part. Consequential damages shall include without limitation, loss of use, income or profit, or losses sustained as the result of injury (including death) to any person or loss of or damage to property.BAKER transmissions, transmission kits and accessories are designed exclusively for use in American V-Twin motorcycles. BAKER shall have no warranty or liability obligation if BAKER parts are used in any other application.If it is determined that a BAKER product has been disassembled during the warranty period for any reason, this limited warranty will no longer apply unless you were instructed to do so by a BAKER Drivetrain technician for diagnostic purposes.



Early Model Comp Sprocket
Move your mouse over image to zoom. Click to enlarge.
Early Model Comp Sprocket Early Model Comp Sprocket Early Model Comp Sprocket
Customer Reviews
4.1 Based on 7 Reviews
5 ★
57% 
4
4 ★
29% 
2
3 ★
0% 
0
2 ★
0% 
0
1 ★
14% 
1
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • 3000
  • trike kit
  • weight
  • runs
  • stock length chain slack
  • shoe adjuster
  • trike conversion
  • tooth sprocket
  • resistance
  • 2.95
SC
11/27/2020
steven c.
United States United States

works great!

Love it. Went from 25 to 23 tooth sprocket in my1996 Electra Glide Ultra Classic, FI with a trike conversion. Flipped shoe adjuster to take up stock length chain slack. Shifts smooth, primary runs quiet. Increased RPM to compensate for the extra weight and resistance of the trike kit. Motor is in much sweeter spot in 5th gear. 3000 rpm at 70mph. rear tire is car 205/70 r15. Throttle response much better. 80 inch Evo, FI. ,Screaming Eagle Heads, Crane Fireball Cam.

SB
09/02/2019
Steen B.
United States United States
  • What model motorcycle do you ride? Flstc/i

I'll never come back

I mailed you to ask if the sprocket was in stock.. You replied that it was.. i ordered it in may and then i got a mail where you wrote it was now in backorder..Funny enough you withdrawed the ammount from my paypalaccount on the same day..wrote you several times to ask what the status was..NO REPLY.. called a friend in the USA to ask if she could help me out..in late August i got the sprocket..bye bye driving season..

A
07/06/2019
Anonymous
United States United States

Gear Change

Hello, I have a 1999 Electra Glide that I went 98ci big bore kit and a 6 speed close ratio gear set. Bike run good but I wanted to get a little more torque to the rear wheel. So I purchased a 22 tooth compensator sprocket, new chain and fat shoe. In total I dropped 2 teeth with only a 300 rpm loss per gear and you can feel the torque. I now have a much more usable gear box. A snappier 4th, 5th gear and 6th feels a lot better when rolling on the throttle. Thanks, Salty

A
05/28/2019
Anonymous
United States
  • What model motorcycle do you ride? 2001 FLHT

Baker comp sprocket

The 23t sprocket fit well and works great with the baker OD6 with 2.95 1st the gear ratio is perfect 3000rpm at 80mph in 6th I needed the older tensioner flipped over on my 2001 FLHT. The only problem was I needed to clearance the primary cover

TK
07/04/2018
Tony K.
United States

Baker all the way!

Bakers tech line is awesome, they’ve helped make important decisions on the mods I’ve made to my bikes. Baker has quality parts! I’ve never had a problem with anything I’ve bought from them

BAKER Drivetrain Early Model Comp Sprocket ReviewBAKER Drivetrain Early Model Comp Sprocket Review
Web Product ID: 8878958403
Baker Drivetrain Team Illustration
Sprocket for the 1985-2006 (except 06 Dyna) compensator.

 

Sprocket & Chain Matrix

  • American made heat treated sprockets, which will help with torque increases.
  • 22 tooth 14% increase

Benefits
It’s common knowledge that engine upgrades like a cam, carburetor, or bigger cubes can increase torque to the rear wheel. But the easiest and most inexpensive way to increase torque to the rear wheel, with no sacrifice in dependability, is to change your primary gearing by changing the compensating sprocket.

Includes the sprocket only. You have a stock 1999 carbureted Road King. By going from a stock 25 to a BAKER 22 tooth compensating sprocket, the torque at the rear wheel will increase by 14%. This eliminates the overall drive ratio performance advantage of fuel injected Road Kings. Changing the primary drive ratio affects the overall torque multiplication to the rear wheel. Decreasing the number of teeth on the compensating sprocket increases torque to the rear wheel and improves acceleration and performance. The trade-off for this performance improvement is an increase in the highway cruising RPM with no transmission change. If a BAKER 6-speed transmission is installed along with a new compensating sprocket, the increase in performance will be realized along with a lower highway cruising RPM than with a stock 5-speed.

 Instructions

Sprocket & Chain Matrix

TERMS AND CONDITIONS

BAKER Drivetrain reserves the right to change prices, terms or policies at any time without notice. Orders can be pre-paid using Visa, MasterCard, American Express, Discover or PayPal. All orders not pre-paid will be sent C.O.D. certified check or money order only unless pre-approved for company check acceptance. Any orders from outside the USA must be pre-paid in US funds via wire transfer; a $30 transfer fee will apply. Prices shown are F.O.B. Haslett, MI.

LIMITED WARRANTY POLICY

BAKER™ transmission assemblies and transmission builder 's kits, are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 5 years from the date of purchase or up to 50,000 miles, whichever occurs first. All other BAKER products are guaranteed to the original purchaser to be free of manufacturing defects in materials and workmanship for a period of 2 years from the date of purchase or up to 24,000 miles, whichever occurs first, except for the following; Warranty does not cover clutch plate wear, throw out bearing failures or mainshaft breakage due to improper clutch nut installation.Electrical components carry a 30-day warranty; cosmetic finishes (chrome plating, hard anodizing, powder coating) are covered for 60 days. Certain promotional products may carry a shorter warranty as specified at the time of purchase. If the product is found by BAKER to be defective, such products will, at the option of BAKER, be replaced or repaired at cost to BAKER.In the event warranty service is required, the original purchaser must call or write BAKER immediately with a description of the problem. If it is deemed necessary for BAKER to make an evaluation to determine whether the transmission assembly or transmission kit or accessory is defective, the entire transmission assembly, whether originally purchased as an assembly or kit, must be properly packaged and returned prepaid to BAKER with a copy of the original purchase invoice. If after evaluation by BAKER a defect in materials and/or workmanship is found, BAKER will, at their option, repair or replace the defective part of the assembly.

RETURNS AND EXCHANGES

Returns are permitted within 30 days of the delivery date. Any merchandise returned for any reason (exchange, credit or modification) must be accompanied by a Return Goods Authorization (RGA) number or it will be refused. Call BAKER to obtain this number prior to returning goods for any reason. There is a 15% re-stocking fee for all returned items. BAKER is not liable for any shipping.

ADDITIONAL WARRANTY PROVISIONS

NOTE: Limited warranty does not cover labor or other costs or expenses incidental to the repair and or replacement of BAKER products.This warranty does not apply if one or more of the following situations is judged by BAKER to be relevant: BAKER OEM transmissions ; (these are subject to the OEM manufacturers warranty only), Improper installation , accident, modification (including but not limited to use of unauthorized parts, transmission oils or lubricants), racing, high performance application, mishandling, misapplication, neglect (including but not limited to improper maintenance), or improper repair. BAKER shall not be liable for any consequential or incidental damages arising out of or in connection with a BAKER transmission assembly, transmission kit, component or part. Consequential damages shall include without limitation, loss of use, income or profit, or losses sustained as the result of injury (including death) to any person or loss of or damage to property.BAKER transmissions, transmission kits and accessories are designed exclusively for use in American V-Twin motorcycles. BAKER shall have no warranty or liability obligation if BAKER parts are used in any other application.If it is determined that a BAKER product has been disassembled during the warranty period for any reason, this limited warranty will no longer apply unless you were instructed to do so by a BAKER Drivetrain technician for diagnostic purposes.