Drivetrain Product
DD7: Direct Drive 7-Speed Complete Transmission
$ 6,395.00
This is for a complete transmission, case and all. The sprocket/pulley is not included in the complete transmission assembly. For the acquisition of these components, kindly contact BAKER Drivetrain at...
4-Speed Complete Transmission
Call Us! 517-339-3835
LIMITED AVAILABILITY! GIVE US A CALL AT 517-339-3835 TO ORDER YOUR 4-SPEED TRANSMISSION NOW! Favored by those inspired by the old-school cool, garage builders and riders of the nostalgic...
DD6: Direct Drive 6-Speed Complete Transmission
$ 4,395.00
* Limited supply of chrome bearing doors available. Please give us a call at 517-339-3835 to order a chrome bearing door. If you enjoy riding for long periods of time...
OD6: Overdrive 6-Speed Complete Transmission
$ 4,395.00
* Limited supply of chrome bearing doors available. Please give us a call at 517-339-3835 to order a chrome bearing door. This is the ORIGINAL 6-speed design that revolutionized the...
6-into-4 Complete Transmission
$ 4,395.00
Made to satisfy the old school tendencies while providing the ability to run reasonable RPM’s at highway speeds. Panhead and Shovelhead riders will love the ability to ride hard with...
GrudgeBox Builder's Kit
$ 3,695.00
The GrudgeBox is a tough overdrive 6-speed to replace your stock 6-speed! The GrudgeBox was engineered with a focus on excessive torque capacity and crisp shifting. All gears are straight...
DD7: Direct Drive 7-Speed Builder's Kit
$ 3,695.00
The DD7 upgrades any existing 2006-later big twin 6 speed to a full 7 speed transmission. The BAKER DD7 is more than just another gear added to the mix for...
OD6: Overdrive 6-Speed Builder's Kit
$ 3,195.00
This is the ORIGINAL 6-speed design that revolutionized the American V-Twin industry. It’s still the best overdrive 6-speed built to this day…hands down. Our OD6 is built to comfortably handle...
DD6: Direct Drive 6-Speed Builder's Kit
$ 3,195.00
* Limited supply of chrome bearing doors with ear available. Please give us a call at 517-339-3835 to order a chrome bearing door. From an engineering standpoint, it is difficult...
F6R: Factory 6-Speed Reverse
$ 2,695.00
Designed, manufactured, tested, proven and beloved - the industry's leading reverse drive for Harley-Davidson is the easiest to use and most worry-free system. Our non-invasive reverse gear system was designed...
Factory 6-Speed Tapered Roller Bearing Kit
$ 995.00
Heal your Achilles heel with the BAKER Main Drive Gear Bearing Kit for 2007-up Big Twins! P/N 640-67 Kit includes BAKER double tapered roller bearing assembly Replacement HD main...
+1.5 Oil Pan
$ 795.00
Keep your 2009-2016 Touring Model cool. Todays Big Twin engine makes a lot more power and a lot more heat than its predecessor of 20 years ago. In 1993, the...
Klassic Kicker Gears
$ 399.00
We started making 6-into-4 transmissions with kickers over ten years ago. At the time, we could only purchase some Taiwanese shit kicker gears in volume because nobody made them...
Cruise Drive Smooth Shift Kit
$ 399.00
The design principles that made our Six-Speed Overdrive shift so smooth were applied to create a shift drum kit that will bolt onto any cruise drive 6-speed and give super...
Street Door
$ 395.00
The Street Door is manufactured with 6061-T6 aluminum and features 28% wider bearings over stock. The bearings are retained with a 6-bolt steel 1/8″ plate, phantom clutch lever movement is...
Early Model Comp Sprocket
$ 395.00
Sprocket for the 1985-2006 (except 06 Dyna) compensator. Sprocket & Chain Matrix Features American made heat treated sprockets, which will help with torque increases. 22 tooth 14% increase BenefitsIt’s...
Transmission Rebuild Kits
$ 379.00
Features This kit was put together to assist you with that high mileage rebuild. When your transmission has reached its limit of efficiency and smooth shifting, it’s time for that...
2.5" Offset Aluminum Pulley
$ 292.00 $ 365.00
ALUMINUM ALLOY RACE PULLEYS BAKER race pulleys are the lightest pulleys available. A stock 32 tooth Harley pulley weighs 5.2 lbs and our 32 tooth race pulley weights 2.0 lbs;...
2.0" Offset Aluminum Pulley
$ 292.00 $ 365.00
ALUMINUM ALLOY RACE PULLEYS BAKER race pulleys are the lightest pulleys available. A stock 32 tooth Harley pulley weighs 5.2 lbs and our 32 tooth race pulley weights 2.0 lbs;...
1.5" Offset Aluminum Pulley
$ 292.00 $ 365.00
ALUMINUM ALLOY RACE PULLEYS BAKER race pulleys are the lightest pulleys available. A stock 32 tooth Harley pulley weighs 5.2 lbs and our 32 tooth race pulley weights 2.0 lbs;...
Ignition Kill Shift Kit
$ 359.00
This slick 5-speed left side drive ignition kill shift kit from BAKER Drivetrain was developed for one thing in mind, Winning! Anybody who wants to launch hard and then up...
N1 Shift System
$ 349.00
The N1 Shift Drums have a 0-down all-up shifting pattern and eliminate any possibility of catching neutral on aggressive 1-2 shifts. Neutral is below 1st. The N1 drum is also...
1.0" Offset Aluminum Pulley
$ 262.80 $ 365.00
ALUMINUM ALLOY RACE PULLEYS BAKER race pulleys are the lightest pulleys available. A stock 32 tooth Harley pulley weighs 5.2 lbs and our 32 tooth race pulley weights 2.0 lbs;...
The BAKER Cable-Type Side Cover
$ 299.00
The NEW BAKER Cable-Type Side Cover was designed with minimal waste and purposeful mechanical intent. Machined from certified 6061-T6 Billet Aluminum, compatible with OEM or aftermarket transmissions. The BAKER Cable-Type...
Armored Attitude Adjuster
$ 299.00
Stronger than the original for those with more abusive inclinations! The BAKER Armored Attitude Adjuster is an insurance policy for your motorcycle in the form of a manual chain tensioner...
167-5-A - 5-speed Billet Steel Shift Forks
$ 279.00
Our Shift Fork Kits include all three forks and are a direct replacement for the standard O.E. 5-speed forks but with much needed improvements over the stock design. Cross section...
Anti Overshift Ratchet Pawl
$ 249.00
The stock ratchet pawl used from 1980 to 2000 utilized scissor spring that was well known for breaking. The unfortunate side effect of this failure is the broken spring leg...
Replacement Clutch Pack Kits
$ 199.00
Clutch Pack Kits for BAKER clutchesBAKER Clutch Pack Replacement Kits contain all necessary fiber and steel plates to restore like new performance to your BAKER clutch. These are original equipment plates...
Speedometer Recalibration Unit
$ 169.00
Starting in 1994, the factory started using electronic speedos on some of the models. Today, all models use this. If you are changing the transmission pulley, rear wheel pulley, rear...
Fine Tooth Adjustment Kit
$ 159.00
The BAKER primary chain adjuster bracket looks like the stock 39990-01 style bracket but has 28% more adjuster teeth. The finer pitch teeth make it easier to dial in your...
Primary Rebuild Kits
$ 119.00
This all-inclusive convenient kit is designed to freshen up those high mileage bikes, prevent leakage, and includes everything you’ll need after opening up your primary. Includes gaskets, seals and O-rings....
Truss Style Shift Lever Kit
$ 99.00
Known to fail, BAKER took the all-too-common-looking stock shifter and improved it in every way with a new design. The most common issue with the stock transmission shift lever...
Heavy Duty Throwout Bearing Kit
$ 99.00
People have been griping about the 37311-75 throwout bearing since it was introduced into Big Twins in 1975. Failures occur when the clutch cable is inadvertently adjusted with little to no...
Kicker Accessories
$ 95.00
Pedal We used to purchase our pedal assemblies from a supplier, these assemblies were prone to break, due to being made out of shit metal. So after receiving many death...
Primary Chain Adjuster Shoe
$ 49.00
Replacement Fat Shoe for special applications. Fitment: Please refer to the Sprocket/Chain Matrix in order to figure out fitment. PN DD6-178
BAKER Gearhead GrudgeBox Classic Crewneck
$ 45.00
A classic pullover crewneck. FABRIC: 100% Combed Ring Spun Organic Cotton Fleece 7.2 oz/sq yd Made in the USA
BAKER Gearhead GrudgeBox Classic Pullover Hoodie
$ 45.00
A classic pullover hoody, featuring a single front pocket and a drawstring neckline. 71% Cotton 29% Polyester Heavy Terry construction Small is approximately 27 7/8" (70.8 cm) in total length...
Oil Spout Spacer Kit
$ 40.00
If you install a high horsepower starter motor on your 1993-2006 FLT-FLH, the oil spout will interfere with the end of the starter motor. Our spout spacer kit moves the...
BAKER Drivetrain Gift Card
$ 25.00
Shopping for someone else but not sure what to give them? Help them pay less on getting a BAKER product. Give them the gift of choice with a BAKER Drivetrain gift...
Spectro Gear Lube
$ 30.43
Picking the right transmission fluid ensures the life and durability of your transmission, that’s why BAKER recommends a fully synthetic GL-5 rated gear weight oil of 75W-140. The Spectro Heavy...
Transmission Dipstick
$ 29.00
Have you ever heard of a 5-speed transmission dipstick breaking off and working its way into the gearbox with disastrous results? Ask any seasoned technician; he’s seen one. The low...
Spacer for Sprocket or Pulley
$ 27.99
33344-94S If you are a seasoned technician, you have seen a severely worn sprocket spacer. Over time and miles with dirt and grit, the stock 33344-94 spacer is too soft...
Born and Built in the USA White T-shirt
$ 25.00
A clean white shirt for those special moments.... Made in the USA. 100% Combed Ring Spun Cotton 4.4 oz/sq yd
Born and Built in the USA T-Shirt
$ 25.00
Born and Built in the USA print on the front and USA design on the back. Printed on Black or Coyote Brown. Made in the USA. 100% Combed Ring...
Buy American T-Shirt Short Sleeve Black
$ 25.00
The economy is the backbone of a nation. Patriots do their best to send their hard-earned money from our nation to another's - in exchange for cheap, disposable junk to only have...
Basic Logo T-Shirt
$ 25.00
Not trying too hard here, this is the tried and true basic black shirt with the BAKER logo simply placed upon it. Made in the USA. 50% Cotton/ 50%...
Red Line Heavy ShockProof Gear Lube
$ 23.97
Picking the right transmission fluid ensures the life and durability of your transmission, that’s why BAKER recommends a fully synthetic GL-5 rated gear weight oil of 75W-140.The Red Line Heavy...
High Torque Bearing Kit
$ 17.99
The 34091-85 inner bearing race has been used on Big Twins since 1985. The inner primary bearing rides on this race. By design, this race press-fits onto the transmission mainshaft. This...
Favorite Links
Shop
Good To Know
Get on the list
Sign up to our mailing list and get the latest on specials, contests, giveaways, new releases and more …
© 2024 BAKER Drivetrain,
Haslett, Michigan 48840 USA | Call Us: 517-339-3835
Buy now, Pay later with Affirm here.
